Chrysler 300 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Chrysler 300 Throttle Body Replacement is $426 with $286 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Chrysler 300V6-2.7LService typeThrottle Body ReplacementEstimate$735.74Shop/Dealer Price$884.53 - $1322.78
2017 Chrysler 300V8-5.7LService typeThrottle Body ReplacementEstimate$774.73Shop/Dealer Price$933.75 - $1406.68
2013 Chrysler 300V8-6.4LService typeThrottle Body ReplacementEstimate$767.17Shop/Dealer Price$924.32 - $1391.60
2008 Chrysler 300V6-3.5LService typeThrottle Body ReplacementEstimate$726.73Shop/Dealer Price$873.77 - $1310.72
2007 Chrysler 300V6-3.5LService typeThrottle Body ReplacementEstimate$726.73Shop/Dealer Price$875.25 - $1313.30
2016 Chrysler 300V8-5.7LService typeThrottle Body ReplacementEstimate$774.73Shop/Dealer Price$933.91 - $1406.97
2008 Chrysler 300V6-2.7LService typeThrottle Body ReplacementEstimate$726.73Shop/Dealer Price$873.79 - $1310.75
2008 Chrysler 300V8-6.1LService typeThrottle Body ReplacementEstimate$780.79Shop/Dealer Price$941.35 - $1418.84
Show example Chrysler 300 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1

Excellent Rating

(5)

Rating Summary
4
0
0
0
1
4
0
0
0
1
Number of Chrysler 300 Throttle Body Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

P0922 OBD-II Trouble Code: Gear Shift Forward Actuator Circuit Low
P0922 means an abnormally low voltage reading from the actuator circuit has occurred due to a faulty actuator, shift shaft, or wiring issues.
How to Know When Your Transmission Is Not Working
Most vehicles use some sort of transmission to transfer the power generated from the engine, into usable power that can turn the wheels....
How Long Does a Power Seat Switch Last?
While While many cars still have manual seat adjustments that work mechanically (you pull up on the bar in front of the seat, and then slide the seat forward or back), power seats are becoming more and more common these...

Car dies while driving in rain

When taking a vehicle through deep water, a lot of care should be taken. If the car gets too deep, water could flow up the exhaust or get sucked into the intake and potentially hydrolock the engine which can cause...

Hey two days ago I drove up to my buddy's place and asked him a question about my charger since he acts like a mechanic I thou

This may be difficult to diagnose without knowing which fuses were moved around. There are a number of fuses that could cause the car to not start if removed or switched. There is a battery power fuse (30 Amp), an...

I need to now if my 2001 GMC Sierra 1550 4WD had a 3 or 4 spline pitman arm.

Hi there. To see if the pitman arm has 3 or 4 splines, check the splines on it with the nut off. Use a flashlight and look at the splines to see if there are 3 large flat areas or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com