Chevrolet Volt Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(62)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(62)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Chevrolet Volt Power Steering Pressure Hose Replacement is $297 with $157 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Chevrolet VoltL4-1.4L HybridService typePower Steering Pressure Hose ReplacementEstimate$468.08Shop/Dealer Price$549.95 - $787.46
2014 Chevrolet VoltL4-1.4L HybridService typePower Steering Pressure Hose ReplacementEstimate$459.07Shop/Dealer Price$539.17 - $775.36
2012 Chevrolet VoltL4-1.4L HybridService typePower Steering Pressure Hose ReplacementEstimate$459.07Shop/Dealer Price$539.20 - $775.40
2015 Chevrolet VoltL4-1.4L HybridService typePower Steering Pressure Hose ReplacementEstimate$459.07Shop/Dealer Price$539.20 - $775.40
2011 Chevrolet VoltL4-1.4L HybridService typePower Steering Pressure Hose ReplacementEstimate$459.07Shop/Dealer Price$540.67 - $777.98
Show example Chevrolet Volt Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(62)

Rating Summary
62
0
0
0
0
62
0
0
0
0

James

31 years of experience
1039 reviews
James
31 years of experience
Chevrolet Volt L4-1.4L Hybrid - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Winter Springs, Florida
James was wonderful. He took the time to really figure out what was going on. Highly recommended

Peter

29 years of experience
592 reviews
Peter
29 years of experience
Chevrolet Volt L4-1.5L Hybrid - Oil Change - Los Angeles, California
Friendly and knowledgeable. I would most definitely book Peter again.

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
Chevrolet Volt L4-1.5L Hybrid - Check Engine Light is on Inspection - La Mirada, California
Manuel was prompt, honest, and professional. I would recommend him to anyone who is looking for a skilled mechanic with integrity.

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Chevrolet Volt L4-1.4L Hybrid - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - San Jose, California
Very friendly and quick service. I will recommend to anyone who need great service.

Excellent Rating

(62)

Rating Summary
62
0
0
0
0
62
0
0
0
0
Number of Chevrolet Volt services completed
682+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0117 OBD-II Trouble Code: Engine Coolant Temperature (ECT) Sensor Circuit Low Output Problem
P0117 P0117 code definition Engine Coolant Temperature (ECT) sensor circuit low output problem What the P0117 code means P0117 is the OBD-II generic code that indicates the engine control module (ECM) has seen the ECT sensor output go less than...
Auto Driving Tips For the New Driver
Congratulations Congratulations - it's your birthday, and it's the day you have been waiting for - you are old enough to get your permit to learn how to drive! While as a driver, you are excited and been waiting for...
How Long Does a Track Bar Last?
The The track bar is part of your car's suspension system and is located underneath your vehicle. The bar is attached to a suspension link that provides a lateral location for the axle. The suspension allows the wheels to move...

How do I delete a paired phone?

If you are no longer going to use a phone with the Bluetooth system, you should delete the pairing. To do so only takes a few steps: 1. Press the Setup button. 2. Rotate the Tune-Scroll knob to Bluetooth, then...

Engine was swapped. I need to know how to tell if they put 1.8 or 2.0 back in?

Each of those engine sizes have unique casting numbers embossed on the head, block, etc. The casting numbers for the 1.8L are Block Cast # 5M0; In-Line Head Cast # 5M0; Cam Cast # 5M0-5M0 or 4M5-4M5; and Crankshaft Cast...

My brake lights don't turn on when I hit the brakes. What is wrong and how much to fix this problem?

Hello there, Hello there, many different faults will cause your 2013 Kia Forte brake lights to not illuminate when you press the brake pedal. Having to replace the bulbs multiple times is not a normal issue and may indicate there...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com