Chevrolet V3500 Brake rotors are turning blue Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15,075)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15,075)

Brake rotors are turning blue Inspection Service

How much does a Brake rotors are turning blue Inspection cost?

On average, the cost for a Chevrolet V3500 Brake rotors are turning blue Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet V3500V8-5.7LService typeBrake rotors are turning blue InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1991 Chevrolet V3500V8-7.4LService typeBrake rotors are turning blue InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Chevrolet V3500V8-5.7LService typeBrake rotors are turning blue InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Chevrolet V3500V8-7.4LService typeBrake rotors are turning blue InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1989 Chevrolet V3500V8-6.2L DieselService typeBrake rotors are turning blue InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1989 Chevrolet V3500V8-7.4LService typeBrake rotors are turning blue InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Chevrolet V3500V8-5.7LService typeBrake rotors are turning blue InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1991 Chevrolet V3500V8-6.2L DieselService typeBrake rotors are turning blue InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet V3500 Brake rotors are turning blue Inspection prices

In a disc brake system, your calipers, pads and rotors are vital components for operation and safe slowing and stopping. In normal circumstances, your rotors should be silvery or gray. However, under some conditions, they can turn blue. This is a sign that there’s something wrong with your brakes, and it’s highly advised that you take action as soon as possible.

How this system works:

Disc brakes are actually pretty easy to understand. Pressurized brake fluid is sent through the lines from the master cylinder. In the caliper, the fluid actuates a piston, which effectively closes the caliper. This pinches the brake rotor between the inner and outer brake pads.

The harder you press the brake pedal, the harder the caliper pinches/squeezes the rotor. In a car equipped with antilock brakes, the ABS system keeps them from locking up by pulsating the brakes dozens of time per second.

The squeezing action of the caliper and pads against the rotor creates friction and heat. Friction is a necessary component here–it’s what slows and stops your car. Heat is unavoidable, but excessive temperatures can actually cause damage. This is where bluing can occur. If one of your rotors has turned blue, it’s important to have the problem diagnosed, as it’s an indication that something’s wrong. Over time, it could even lead to cracking of the rotor and damage to the pads, as well as compromising your safety on the road.

Common reasons for this to happen:

  • Locked Caliper: One very common reason for rotors to turn blue is that the caliper is locked and the brake pads remain in almost constant contact with the metal. This might be slight enough that you don’t notice any drag during normal operation, but it will be enough to generate significant heat and wear.

  • Corroded Slide Pins: Your car’s calipers slide back and forth on metal pins. These pins need to be well lubricated, clean and free of debris. If they become corroded, the caliper will not slide in and out properly and can remain too close to the rotor rather than moving back to the start position.

  • Pinched/Deteriorating Brake Line: Your brakes work on hydraulic pressure. If there’s damage to one of the brake lines (a kink, or internal damage to the liner that limits the amount of fluid flowing in and out), it can cause your caliper to stay at least slightly engaged at all times. This generates heat and blues your rotor.

  • Driver Error: If you’re a “two-footed” driver or regularly ride your brakes because you do a lot of stop and go driving or live in an area with lots of hills, you could be the inadvertent cause of the problem. Constantly engaging your brakes causes the same buildup of heat as having a locked caliper, but you’ll notice bluing on two or four rotors, rather than just one.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect your brake system, including the caliper, rotor, lines, pads and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the entire system visually. A test drive may be necessary, as well as other diagnostic steps. The mechanic will determine if there is drag on the affected wheel/wheels from a locked caliper and then advise you on the next step in the repair process.

How important is this service?

Having brake rotors that turn blue is more than just an anomaly. It can become an expensive problem, and it can also reduce your safety on the road. Extreme heat can cause your rotors to warp and even crack, and your brake pads will deteriorate rapidly, leaving you with less stopping power. If the problem affects both front brakes, you may also notice brake fade. One of our professional mechanics can diagnose and repair the problem for you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15,075)

Rating Summary
14,121
474
110
84
286
14,121
474
110
84
286

Weston

13 years of experience
3 reviews
Weston
13 years of experience
Chevrolet Silverado 1500 V8-4.8L - Car will not turn over - Scottsdale, Arizona
Prompt, friendly, and knowledgeable. Thanks

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Chevrolet Tahoe V8-5.3L - Car Battery Replacement - Houston, Texas
Breck was on time, well actually a early. Super polite and professional. Would definitely use again and recommend.

Timmy

10 years of experience
43 reviews
Timmy
10 years of experience
Chevrolet Trailblazer L6-4.2L - Tie Rod End Replacement (Front Left Outer, Front Right Outer) - Memphis, Tennessee
Excellent mechanic, good person

Erik

35 years of experience
4 reviews
Erik
35 years of experience
Chevrolet Malibu V6-3.5L - Loud noise is coming from rear brakes - Tallahassee, Florida
Thanks Erik for coming out and checking my car, great job well done!!!!

Excellent Rating

(15,075)

Rating Summary
14,121
474
110
84
286
14,121
474
110
84
286
Number of Chevrolet services completed
165825+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Mattress On Your Roof?
If If you bought a mattress at the local mattress store, you may be wondering how to transport it home. While some stores offer delivery, others do not. Tying a mattress to the roof of your car is an option,...
How to Buy a Personalized License Plate in Nevada
A A personalized license plate (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer) is a great way to add a little bit of fun and flair to your car. With a personalized plate, you can make your car uniquely “you,” and use your license plate to say...
B1394 OBD-II Trouble Code: Power Door Memory Lock Relay Circuit Short to Battery
B1394 means there is an error with the power door memory lock relay circuit, likely due to damaged wires or electrical component, or a faulty circuit.

Screeching chirp noise engine - 1991 GMC K2500

Hey there. The A/C pulley bearing may be binding causing the chirping. Try spraying each belt one at a time with some water in a spray bottle. The noise will change or go away when the belt that is chirping...

Tried to reset key fob didn't work now immobiliser activated.

The Immobilizer System indicator light comes on for a few seconds, then it goes out when you turn the ignition switch to the 'ON' position. The Immobilizer System light will blink if it cannot recognize the key coding. Try reprogramming...

When I refuel to get gas I have to hold the gas pedal to turn it on then it sputters for a minute

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com