Chevrolet Trax Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(48)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(48)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Chevrolet Trax Brake Master Cylinder Replacement is $342 with $160 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Chevrolet TraxL4-1.4L TurboService typeBrake Master Cylinder ReplacementEstimate$522.30Shop/Dealer Price$607.18 - $851.29
2015 Chevrolet TraxL4-1.4L TurboService typeBrake Master Cylinder ReplacementEstimate$510.59Shop/Dealer Price$593.17 - $835.56
2014 Chevrolet TraxL4-1.4L TurboService typeBrake Master Cylinder ReplacementEstimate$733.89Shop/Dealer Price$872.33 - $1282.22
2017 Chevrolet TraxL4-1.4L TurboService typeBrake Master Cylinder ReplacementEstimate$510.59Shop/Dealer Price$593.20 - $835.61
2020 Chevrolet TraxL4-1.4L TurboService typeBrake Master Cylinder ReplacementEstimate$947.60Shop/Dealer Price$1114.85 - $1600.86
2016 Chevrolet TraxL4-1.4L TurboService typeBrake Master Cylinder ReplacementEstimate$510.59Shop/Dealer Price$593.38 - $835.93
2013 Chevrolet TraxL4-1.4L TurboService typeBrake Master Cylinder ReplacementEstimate$733.89Shop/Dealer Price$872.35 - $1282.25
Show example Chevrolet Trax Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(48)

Rating Summary
46
2
0
0
0
46
2
0
0
0

Shane

18 years of experience
379 reviews
Shane
18 years of experience
Chevrolet Trax L4-1.4L Turbo - Check Engine Light is on - Leander, Texas
Shane was on time, found the problem quickly and gave me a quick quote.

William

35 years of experience
731 reviews
William
35 years of experience
Chevrolet Trax L4-1.4L Turbo - Oil Change - Surprise, Arizona
Awesome as usual.

Nicholas

12 years of experience
691 reviews
Nicholas
12 years of experience
Chevrolet Trax L4-1.4L Turbo - Car idle is rough - Apex, North Carolina
He was very professional and took the time to explain things to me. I had a few questions about some other things with my car and he was very helpful and truthful. I would not hesitate to have him work on my car.

Mathew

18 years of experience
66 reviews
Mathew
18 years of experience
Chevrolet Trax L4-1.4L Turbo - Water Pump - New Port Richey, Florida
Great mechanic very informative

Excellent Rating

(48)

Rating Summary
46
2
0
0
0
46
2
0
0
0
Number of Chevrolet Trax services completed
528+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Nitrogen Vs. Air in your Tires
There are benefits to using air or nitrogen for tire inflation depending on your day-to-day driving conditions.
P0258 OBD-II Trouble Code: Injection Pump Fuel Metering Control “B” Low (Cam/Rotor/Injector)
P0258 P0258 code definition Injection Pump Fuel Metering Control “B” Low (Cam/Rotor/Injector) What the P0258 code means P0258 is an OBD-II generic code for the injection pump fuel metering control valve circuit having low or no current flow when the...
Disabled Driver Laws and Permits in Texas
In In the State of Texas, if you have a disability, you can apply for various permits under Texas law that will entitle you to park in designated spaces, and at no cost in metered spaces. Summary of Texas disabled...

Replaced chewed wires fixed the problem, but only for a little while.

Hello, having damaged wiring can cause all kinds of issues, the only proper way to repair wiring is to cut off the damaged portion, strip the wiring, then solder the wiring together and use wiring shrink tubing to cover up...

Throttle Body, PCV tube, and valve cover seal needs replaced.

Billing question sent to CS for replacement cost of the PCV tube and valve cover seal.

My 2001 Acura MDX is stalling intermittently. It usually takes a jump start to get it going again.

It sounds like you may have a weak battery, a failing voltage regulator or failing alternator. As you may know, the alternator charges the battery while the engine runs by generating amperage and recharging the battery while the engine turns...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com