Chevrolet Trailblazer Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(503)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(503)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Chevrolet Trailblazer Intake Manifold Gaskets Replacement is $418 with $96 for parts and $322 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Chevrolet TrailblazerL6-4.2LService typeIntake Manifold Gaskets ReplacementEstimate$547.94Shop/Dealer Price$604.08 - $753.87
2007 Chevrolet TrailblazerL6-4.2LService typeIntake Manifold Gaskets ReplacementEstimate$715.71Shop/Dealer Price$776.78 - $945.96
2007 Chevrolet TrailblazerV8-6.0LService typeIntake Manifold Gaskets ReplacementEstimate$695.69Shop/Dealer Price$765.70 - $963.17
2006 Chevrolet TrailblazerV8-6.0LService typeIntake Manifold Gaskets ReplacementEstimate$695.69Shop/Dealer Price$765.69 - $963.16
2006 Chevrolet TrailblazerL6-4.2LService typeIntake Manifold Gaskets ReplacementEstimate$555.12Shop/Dealer Price$617.61 - $787.87
* Chevrolet TrailblazerV8-5.3LService typeIntake Manifold Gaskets ReplacementEstimate$645.73Shop/Dealer Price$703.67 - $863.98
2009 Chevrolet TrailblazerV8-6.0LService typeIntake Manifold Gaskets ReplacementEstimate$695.69Shop/Dealer Price$765.74 - $963.25
2009 Chevrolet TrailblazerL6-4.2LService typeIntake Manifold Gaskets ReplacementEstimate$555.12Shop/Dealer Price$614.22 - $781.93
Show example Chevrolet Trailblazer Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(503)

Rating Summary
474
17
2
5
5
474
17
2
5
5

Claud

6 years of experience
341 reviews
Claud
6 years of experience
Trailblazer 2003 - Control Arm Assembly - Southfield, MI
Claud was Great. Very professional. I have used Claud more then once. Will use him again in the future if needed.

John

23 years of experience
879 reviews
John
23 years of experience
Trailblazer 2008 - Window Regulator - Friendswood, TX
Excelente service at time and fast work

Refugio

20 years of experience
49 reviews
Refugio
20 years of experience
Trailblazer 2005 - Oil/Fluid Leak - San Antonio, TX
He showed up early, was friendly and gave me a honest opinion.

Jimmi

25 years of experience
156 reviews
Jimmi
25 years of experience
Trailblazer 2007 - Throttle Body - Kissimmee, FL
Jimmi came early and serviced my car. He was very knowledgeable, friendly ,and very good at explaining the problem . I will request another service for my car using Jimmi's expertise next week.

Excellent Rating

(503)

Rating Summary
474
17
2
5
5
474
17
2
5
5
Number of Chevrolet Trailblazer services completed
5533+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Troubleshoot a Car That is Hard to Start
"Car not starting" is a common complaint among car owners and is caused by faulty car batteries, spark plugs, car starter, or fuel pump.
2012 Hyundai Sonata vs. 2012 Hyundai Elantra: Which One Should I Buy?
Mid-size sedans are a large category. These vehicles are well suited for either a large commuter car that is not going to get quite commuter car statistics as far as gas mileage or a smaller sedan option. Think of mid-size...
A Buyer’s Guide to the 2012 Toyota Sienna
The The 2012 Toyota Sienna is one of the most innovative and luxurious minivans on the market today. Not only has Toyota increased its size to better compete with the Dodge Grand Caravan and the Honda Odyssey, but you can...

Fuel pump shot metal shards throughout fuel system

Hello. If the fuel tank was not replaced, it is likely due to the fact that the shop did not deem it necessary to the repair. It may be possible that the fuel tank was not exposed to any metal,...

Problem accelerating

Hello, thank you for writing in. When you hear, feel, or notice any type of issues with the vehicle it should never be ignored. The vehicle may just need some basic maintenance. Consider the last time you had the following...

Bubbling behind dashboard when starting car

Hi There, It sounds like you may have air bubbles in your cooling system. Typically, this is easily fixed by having the cooling system flushed (https://www.yourmechanic.com/services/cooling-system-flush). The heater core is also located behind the dashboard in your vehicle which is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com