Chevrolet Silverado 1500 HD Coolant Level Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Coolant Level Sensor Replacement Service

How much does a Coolant Level Sensor Replacement cost?

On average, the cost for a Chevrolet Silverado 1500 HD Coolant Level Sensor Replacement is $212 with $117 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Chevrolet Silverado 1500 HDV8-6.0LService typeCoolant Level Sensor ReplacementEstimate$349.15Shop/Dealer Price$417.69 - $600.81
2001 Chevrolet Silverado 1500 HDV8-6.0LService typeCoolant Level Sensor ReplacementEstimate$329.15Shop/Dealer Price$397.71 - $580.84
2006 Chevrolet Silverado 1500 HDV8-6.0LService typeCoolant Level Sensor ReplacementEstimate$329.15Shop/Dealer Price$397.71 - $580.84
2005 Chevrolet Silverado 1500 HDV8-6.0LService typeCoolant Level Sensor ReplacementEstimate$329.15Shop/Dealer Price$397.69 - $580.80
2002 Chevrolet Silverado 1500 HDV8-6.0LService typeCoolant Level Sensor ReplacementEstimate$329.15Shop/Dealer Price$397.72 - $580.87
Show example Chevrolet Silverado 1500 HD Coolant Level Sensor Replacement prices

What is the Coolant Level Sensor all about?

The coolant level sensor is designed to alert the driver when the coolant level is low and to prevent overheating or damage to the engine. This aids in diagnosing leaks and other dangerous cooling system conditions.

Coolant level sensors can consist of a plastic sensor with a plastic or foam float that sits underneath the coolant reservoir cap. Or, they can be plastic sensors that plug into the radiator or other component of the cooling system.

Some vehicles are equipped with a Low Coolant or Check Coolant warning light, while others may display a picture of the vehicle with a red dot in the engine bay. This is to inform the driver that the coolant needs to be checked or that there is a fault with the sensor.

Keep in mind:

The Check Coolant warning light may seem like a nuisance, but the system is there for a reason: to inform the driver of potentially dangerous engine conditions.

How it's done:

  • The Coolant Level Sensor is verified that it needs to be replaced. The coolant is drained to be below the sensor.

  • The defective Coolant Level Sensor is removed by disconnecting the electrical connection and removing it from the radiator or reservoir.

  • The new Coolant Level Sensor is installed, connected and the coolant is refilled. Then the cooling system is purged of air.

  • The Coolant Level Sensor is tested for leaks after system is filled and engine is run.

  • The vehicle is tested to ensure proper operation of the Cooling System

Our recommendation:

If you suspect the coolant level sensor has failed, have one of our licensed mechanics come to you to diagnose the issue and replace the part. Our mechanics can determine whether the sensor float is faulty, if the sensor itself is bad, or if there is low coolant or a leak in the system.

What common symptoms indicate you may need to replace the Coolant Level Sensor?

  • Check Coolant or Low Coolant light on and displays even when coolant been topped off
  • Coolant level is low but no warning lights illuminate

How important is this service?

While you may wish to ignore the beeping and warning lights in your vehicle, it is important to get a diagnosis for the problem immediately before any further damage occurs, including unwanted coolant loss, engine overheating, and other major issues.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(10)

Rating Summary
9
0
0
0
1
9
0
0
0
1

Victor

35 years of experience
228 reviews
Victor
35 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Coolant is leaking - Albuquerque, New Mexico
Very good

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Oil/Fluid Leak - Conroe, Texas
Maxwell was great. Time efficient, knowledgeable, quick to find the problem. Scheduled him to do my repair!

Michael

15 years of experience
11 reviews
Michael
15 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Serpentine/Drive Belt - Albuquerque, New Mexico
Very good

Jay

37 years of experience
948 reviews
Jay
37 years of experience
Chevrolet Silverado 1500 HD V8-6.0L - Starter - Corona, California
Jay is always very knowledgeable and professional. We are pleased when we see it is Jay who will be servicing our vehicles through Your Mechanic. Thank you Jay!

Excellent Rating

(10)

Rating Summary
9
0
0
0
1
9
0
0
0
1
Number of Chevrolet Silverado 1500 HD services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

What Happens to Sensors if They are Dirty?
Car sensors can get dirty with normal use. Symptoms of dirty sensors include reduced engine power, worse gas mileage, or an engine that hesitates.
How Long Does an EGR Pressure Feedback Sensor Last?
In In today's world people are more aware of exhaust gases than ever before. With that said measures have been built into modern vehicles that are meant to cut down on the emissions released into the air. Built into your...
How to Replace an Intake Air Temperature Sensor
An air temperature sensor, or air charge temperature sensor, signals a car’s computer about the air-to-fuel ratio. Replacing one requires few tools.

Where is Crankshaft Position Sensor on 2011 VW Routan with 3.6L engine?

The crankshaft position sensor (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-crankshaft-position-sensor) is located in the right rear of the engine block. There is a protective shield that needs to be removed for access to the sensor.

OBD-II scanner read code P0108

Hello. The MAP sensor reading on a scanner should read about 1.0 to 1.5 volts at idle and 4.5 to 4.8 volts at wide open throttle. The MAP should read 4.8 volts or more when you have the key on...

Car stalls out of nowhere

Hello - what a frustrating problem to solve! You may have provided a key clue to the solution, given that it requires another vehicle to jump start it to get it going again. This MAY mean that the increased starting...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com