Chevrolet Silverado 1500 HD Classic Parking brake is stuck Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15,266)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15,266)

Parking brake is stuck Inspection Service

How much does a Parking brake is stuck Inspection cost?

On average, the cost for a Chevrolet Silverado 1500 HD Classic Parking brake is stuck Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Chevrolet Silverado 1500 HD ClassicV8-6.0LService typeParking brake is stuck InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Chevrolet Silverado 1500 HD Classic Parking brake is stuck Inspection prices

Your parking brake is a valuable component that helps ensure better safety when parked on an incline, and also helps reduce unnecessary loading of the transmission. If you’ve ever parked on a hill and not used the parking brake, you’re familiar with the loud “thunk” and lurch that happens when you crank the car and put it in drive when you’re ready to leave. Engaging the parking brake avoids this, and enhances safety. However, if your parking brake is stuck, the light in your dash will stay on, and you may damage the brake shoes while driving.

How this system works:

Your parking brake is actually very little more than a lever attached to a cable. When you pull the parking brake handle in the cabin, it engages a cable. That cable runs from the parking brake handle under the car and to the back wheels. Pulling up on the handle pulls the cable taut, which engages the parking brake.

The brake itself is nothing more than a pair of small brake shoes mounted inside the drum built into the rear rotors of your car. The shoes press outward on the drum, holding the wheel in place (it’s not as strong as your normal brakes, and generally cannot hold the car by itself on anything more than a very gentle incline).

When you put the parking brake handle down, the cable disengages the parking brake and the shoes retract from against the walls of the drum. This releases the vehicle, allowing you to drive without damaging the parking brake.

Common reasons for this to happen:

  • Rust and Corrosion: One of the most common problems with parking brakes is corrosion on the cable that leads to the rear brakes. Once the cable begins to rust, it can stick. When this happens, you won’t be able to release the parking brake.

  • Engaged Too Hard: While uncommon, it is possible for the parking brake to stick if you applied it to hard. If you crank back on the handle as hard as possible, you’re overdoing it, and it’s possible for the cable to stretch, the shoes to stick and more.

  • Damaged/Stuck Adjuster Screw: The rear brake shoes are operated by an adjuster screw. If the screw is stuck, corroded or damaged, it will not move and your parking brake will not disengage.

  • Leaving It Engaged for Too Long: Most of us use our parking brake on a relatively limited basis, leaving it engaged overnight at the longest. In some situations, leaving it engaged for a long period (say over the winter in storage) can cause the assembly to freeze and stick.

What to expect:

Our professional mobile mechanic will come to your home or office to inspect the parking brake handle, cable, lever, adjusting screw, shoes and other components in the system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of the parking brake, from the handle to the cable, all the way back to the lever, the spring, the adjusting screw and the shoes. It may be necessary to remove one or both rear wheels. It may also be necessary to disassemble the rear brakes to reach the parking brake components.

How important is this service?

If your parking brake is stuck, you cannot drive the car without causing further damage. It’s highly advised to leave your car parked where it is if you notice that the Parking Brake light stays on after lowering the handle, or feeling resistance when trying to drive (or smelling burned brake material after driving). One of our professional mechanics will be able to diagnose the problem and restore functionality to your parking brake.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15,266)

Rating Summary
14,304
478
111
85
288
14,304
478
111
85
288

Robert

22 years of experience
7 reviews
Robert
22 years of experience
Chevrolet Impala V6-3.5L - Brake Rotor/Disc Replacement (Front) - Highland, Indiana
Robert was excellent. He came right on time. Showed me and explained all the work that he was doing to my vehicle.

Kris

12 years of experience
75 reviews
Kris
12 years of experience
Chevrolet Malibu L4-2.4L - Car is not starting - Atlanta, Georgia
Excellent service 10/10.

Theodore

16 years of experience
1638 reviews
Theodore
16 years of experience
Chevrolet Tahoe V8-5.7L - Heater Control Valve - Renton, Washington
Theo, is such an awesome mechanic. He worked on both of cars and does an amazing job.

Scott

34 years of experience
560 reviews
Scott
34 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.6L Turbo Diesel - Oil Change - Denver, Colorado
Excellent job!

Excellent Rating

(15,266)

Rating Summary
14,304
478
111
85
288
14,304
478
111
85
288
Number of Chevrolet services completed
167926+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

P0325 OBD-II Trouble Code: Knock Sensor Malfunction (Sensor 1, Bank 1)
P0325 code definition Knock Sensor Malfunction (Sensor 1, Bank 1) What the P0325 code means P0325 is a general ODB2 diagnostic trouble...
P0919 OBD-II Trouble Code: Gearshift Position Control Error
P0919 means there is a malfunction in the gearshift's ability to manipulate the shift position due to faulty gearbox components, or wiring issues.
Top 4 Car Sunroof Repairs
Sunroof problems should be addressed immediately to prevent interior damage from the elements and even more costly repairs.

Key not turning off

Hi there. Sounds to me that you are experiencing 1 of 2 things. Either you have a faulty ignition cylinder, or your "Park" setting is not fully engaging. I would recommend having a certified mechanic diagnose your key not turning...

Are the miles too high for me to buy this car?

I would recommend checking the Kelly Blue Book Value (http://www.kbb.com/) for your car which is relevant to your particular zip code. This should give you an indication of generally what the car is worth. You will of course want to...

Car is making a noise while idling. It sounds as though a motor bike is nearby. What might it be and is it safe? 2000 BMW 528

Hello - the sound you hear is most likely the electric cooling fans coming on while the vehicle is stopped. The lack of airflow across the radiator while stopped or moving slowly causes engine temperature to rise, triggering the cooling...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com