Chevrolet Malibu Limited Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Chevrolet Malibu Limited Hazard / Turn Signal Flasher Replacement is $144 with $49 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Chevrolet Malibu LimitedL4-2.5LService typeHazard / Turn Signal Flasher ReplacementEstimate$213.91Shop/Dealer Price$248.64 - $330.33
Show example Chevrolet Malibu Limited Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

Bobby

27 years of experience
88 reviews
Bobby
27 years of experience
Chevrolet Malibu Limited L4-2.5L - Car is not starting - Charlotte, North Carolina
Very informative and extremely helpful

Keith

26 years of experience
231 reviews
Keith
26 years of experience
Chevrolet Malibu Limited L4-2.5L - Strut Assembly Replacement (Front) - Dallas, Texas
Very descriptive. Very professional

Ruben

35 years of experience
83 reviews
Ruben
35 years of experience
Chevrolet Malibu Limited L4-2.5L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Riverview, Florida
Very professional and friendly. Very clean work.

Keith

26 years of experience
231 reviews
Keith
26 years of experience
Chevrolet Malibu Limited L4-2.5L - Brake Pads Replacement (Front, Rear) - Dallas, Texas
Did a great job and was very honest.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Chevrolet Malibu Limited services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Buy Good Quality Brake Shoes
Most Most cars on the road today have a disc brake system, at least on the front end. Cars used to utilize drum brakes on both front and rear, and some cars today still have a drum system in the...
How to Get a New Hampshire Driver's Permit
New New Hampshire is one of the few states that does not use a graduated driver’s license program. The DMV in the state does not issue learner’s permits. The state of New Hampshire allows anyone over the age of 15...
P2711 OBD-II Trouble Code: Unexpected Mechanical Gear Disengagement
P2711 means a malfunction was detected from the output shaft speed sensor due to failing transmission components or electrical issues and/or problems.

Remote not opening door

Hi. It is possible to open the doors without keys using special tools. Our certified technicians would be able to open the door and help you retrieve your keys. Key fobs tend to use watch batteries which eventually run out...

P1682 code with remote start from factory

If the noise only occurs when you use remote start, that means that whatever is in "that" (factory added) circuit would surely be looked at. As you probably know, problems of this type are diagnosed using electrical test equipment, along...

We don't know how to turn on our day time running lights

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com