Chevrolet Lumina Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(84)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(84)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Chevrolet Lumina Wheel Bearings Replacement is $260 with $120 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Chevrolet LuminaV6-3.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$1731.20Shop/Dealer Price$2125.34 - $3298.83
1997 Chevrolet LuminaV6-3.1LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$1721.29Shop/Dealer Price$2113.48 - $3285.52
1993 Chevrolet LuminaL4-2.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$1721.29Shop/Dealer Price$2113.51 - $3285.57
1995 Chevrolet LuminaV6-3.1LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$444.67Shop/Dealer Price$507.34 - $689.50
1992 Chevrolet LuminaV6-3.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$386.27Shop/Dealer Price$449.67 - $632.38
1990 Chevrolet LuminaL4-2.5LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$386.27Shop/Dealer Price$448.34 - $630.05
1997 Chevrolet LuminaV6-3.1LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$430.07Shop/Dealer Price$492.57 - $674.61
1990 Chevrolet LuminaV6-3.1LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$386.27Shop/Dealer Price$448.20 - $629.80
Show example Chevrolet Lumina Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(84)

Rating Summary
80
1
1
0
2
80
1
1
0
2

Michael

13 years of experience
65 reviews
Michael
13 years of experience
Chevrolet Lumina V6-3.1L - Cooling/Radiator Fan Motor - Conyers, Georgia
Prompt, knowledgeable and courteous.

Jerame

14 years of experience
7 reviews
Jerame
14 years of experience
Chevrolet Lumina V6-3.1L - Starter - Kansas City, Missouri
It was great.. He did it so fast.. And new what it was.. So grateful

Nathan

30 years of experience
260 reviews
Nathan
30 years of experience
Chevrolet Lumina V6-3.1L - Car shuts off when stepping on gas pedal - Tulsa, Oklahoma
Nathan was punctual, professional and thorough in his diagnosis of my problem.

Jason

18 years of experience
429 reviews
Jason
18 years of experience
Chevrolet Lumina V6-3.1L - Fuel Injector - San Jose, California
He knows what he's doing. I would recommend him to any one.

Excellent Rating

(84)

Rating Summary
80
1
1
0
2
80
1
1
0
2
Number of Chevrolet Lumina services completed
924+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Replace a Windshield Wiper Linkage
Car windshield wipers have a link between the motor and the wiper arm and blade. This wiper linkage can get bent and should be repaired immediately.
How to Use a Gas Station Car Wash
It It is inevitable that your vehicle will need to be washed, and it’s convenient to do so when you go to a gas station to fuel up. Many gas stations have a car wash on site, whether it is...
Customer Service 101 For Car Mechanics
Automotive technician jobs require customer service skills as much as technical skills. Communication and cleanliness are part of great service.

How do I use the navigation system?

If your vehicle is equipped with a navigation system, it will help you find directions where you need to go. Your navigation will appear on the center display. To use the navigation system. Type in the address you need to...

Engine light and bad gears

When you disconnect the battery, the PCM (powertrain control module) looses it's stored information about your driving habits. Believe it or not, the car learns how you drive, and tries to adapt to your style, so things may not go...

Replaced battery and now car has no headlights, running lights, radio, horn, blower for heater and rear defrost. Car starts and drives. Test shows battery output 11.3 with car running and with car off

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com