Chevrolet G10 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(40)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(40)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Chevrolet G10 Front Crankshaft Seal Replacement is $171 with $17 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Chevrolet G10V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$213.70Shop/Dealer Price$228.46 - $263.83
1992 Chevrolet G10V8-5.0LService typeFront Crankshaft Seal ReplacementEstimate$291.38Shop/Dealer Price$305.30 - $340.04
1994 Chevrolet G10V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$203.79Shop/Dealer Price$216.63 - $250.57
1993 Chevrolet G10V6-4.3LService typeFront Crankshaft Seal ReplacementEstimate$203.79Shop/Dealer Price$216.63 - $250.56
1995 Chevrolet G10V8-5.0LService typeFront Crankshaft Seal ReplacementEstimate$203.79Shop/Dealer Price$218.25 - $253.40
1990 Chevrolet G10V8-5.0LService typeFront Crankshaft Seal ReplacementEstimate$287.40Shop/Dealer Price$300.61 - $332.57
1993 Chevrolet G10V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$203.79Shop/Dealer Price$216.65 - $250.60
1992 Chevrolet G10V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$291.38Shop/Dealer Price$305.34 - $340.11
Show example Chevrolet G10 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(40)

Rating Summary
35
2
1
0
2
35
2
1
0
2

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Chevrolet G10 V8-5.0L - Alternator - Charlotte, North Carolina
Install went well.

Luis

19 years of experience
363 reviews
Luis
19 years of experience
Chevrolet G10 L6-4.1L - Starter - Elizabeth, New Jersey
Prompt, honest and friendly. Couldnt ask for more in a mechanic

Mazyar

20 years of experience
587 reviews
Mazyar
20 years of experience
Chevrolet Equinox L4-2.4L - Front Crankshaft Seal - Norcross, Georgia
Mark was great and work was done quickly and he answer all my questions

Jacob

13 years of experience
329 reviews
Jacob
13 years of experience
Chevrolet Equinox L4-2.4L - Front Crankshaft Seal - Plano, Texas
Jacob is a very good technician would definitely recommend him.

Excellent Rating

(40)

Rating Summary
35
2
1
0
2
35
2
1
0
2
Number of Chevrolet Front Crankshaft Seal Replacement services completed
440+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Replace the Downshift Solenoid in Your Car
Downshift solenoids in your transmission give you a seamless experience when braking, and are important to make sure brakes always work properly.
How to Buy a Car With a Lien on It
If you are trying to buy a vehicle and find out that there is a current lien on it, the process becomes more complicated. With a lien on the title, you may not be able to: Transfer the title into...
P2093 OBD-II Trouble Code: A Camshaft Position Actuator Control Circuit High Bank 2
P2093 P2093 code definition The P2093 code is a general OBD-II diagnostic trouble code indicating a fault with the “A” camshaft position actuator control circuit high bank 2. What the P2093 code means The camshaft position sensor “A” is indicating...

idles rough after heavy acceleration, going up hill, getting off freeway, weak warm start ups

The most common cause of this is either a charging system issue, such as the alternator or battery, or low fuel pressure from a clogged line or failing fuel pump. Either the charging system or the fuel system can have...

Why does my car have rough idle and lack of power only on warm days?

This problem may be caused by a coolant temperature sensor, idle air control valve, throttle position sensor, or O2 sensor that may be failing. Use a digital volt ohm meter (DVOM) to check resistance on all of the sensors. If...

Service engine soon light came on today, there’s a noise that sound like someone shaking a salt shaker or maybe a hissing sound

The fact that the check engine light (aka, "service engine soon") came on means that diagnostic trouble code(s) were registered and stored in the engine computer. The codes should be accessed, interpreted, and a proper diagnostic performed especially as the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com