Chevrolet Express 2500 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(80)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(80)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chevrolet Express 2500 Car Thermostat Replacement is $224 with $84 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Chevrolet Express 2500V6-4.3LService typeCar Thermostat ReplacementEstimate$323.58Shop/Dealer Price$369.33 - $498.46
2000 Chevrolet Express 2500V6-4.3LService typeCar Thermostat ReplacementEstimate$329.17Shop/Dealer Price$373.33 - $501.28
2000 Chevrolet Express 2500V8-5.0LService typeCar Thermostat ReplacementEstimate$314.57Shop/Dealer Price$358.57 - $486.40
2007 Chevrolet Express 2500V8-6.6L Turbo DieselService typeCar Thermostat ReplacementEstimate$828.04Shop/Dealer Price$896.49 - $1085.12
2009 Chevrolet Express 2500V8-6.0LService typeCar Thermostat ReplacementEstimate$369.83Shop/Dealer Price$425.80 - $585.48
2004 Chevrolet Express 2500V6-4.3LService typeCar Thermostat ReplacementEstimate$329.17Shop/Dealer Price$373.51 - $501.60
2009 Chevrolet Express 2500V8-4.8LService typeCar Thermostat ReplacementEstimate$369.83Shop/Dealer Price$424.20 - $582.68
2011 Chevrolet Express 2500V8-6.6L Turbo DieselService typeCar Thermostat ReplacementEstimate$828.04Shop/Dealer Price$896.49 - $1085.12
Show example Chevrolet Express 2500 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(80)

Rating Summary
75
2
2
0
1
75
2
2
0
1

Michael

25 years of experience
138 reviews
Michael
25 years of experience
Express 2500 2006 - Spark Plugs - Indianapolis, IN
Michael was excellent. Very professional and did a thorough job.

Michael

25 years of experience
138 reviews
Michael
25 years of experience
Express 2500 2006 - Ignition Cable (Spark plug wires) - Indianapolis, IN
Michael was excellent. Very professional and did a thorough job.

Jequan

9 years of experience
5 reviews
Jequan
9 years of experience
Express 2500 2002 - Oil/Fluid Leak - Durham, NC
Very good

Roger

10 years of experience
37 reviews
Roger
10 years of experience
Express 2500 2014 - Drive Belt Tensioner - Joplin, MO
Roger was great!

Excellent Rating

(80)

Rating Summary
75
2
2
0
1
75
2
2
0
1
Number of Chevrolet Express 2500 services completed
880+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P2740 OBD-II Trouble Code: Transmission Fluid Temperature Sensor B Circuit
P2740 means system is receiving a high temperature reading due to low fluid level or a failing transmission or other electrical or sensor problem.
The Guide to Legal Car Modifications in Iowa
ARENA Creative / Shutterstock.com Whether you currently live in Iowa or you are planning on moving to the state, you need to know the laws and regulations regarding vehicle modifications to ensure that your car or truck...
What is the Difference Between Buying and Leasing a New Car?
In In today’s economy, it is important to make the best financial decisions possible. Choosing how to pay for a car is one of the toughest decisions you can make. Cars are tricky. Cars lose much of their value in...

How do you add a voice tag to an entry in the HandsFreeLink on?

When you create entries in the HandsFreeLink® (HFL) system, you’re given the option of creating a voice tag at that time. However, you can also add a voice tag later on if you change your mind. Here’s what you should...

Why would my clutch pedal be stuck on the floor in my 1999 Honda Civic

Hello. The most common cause of a clutch pedal not returning to its upright position is a bad clutch master cylinder. When it fails internally it will no longer hold pressure which keeps it from returning up. It can also...

Everytime i accelerate my car makes a squealing noise

You may have one of your serpentine belt pulleys locking up or the belt tensioner is bad. Check these out to see what one is causing the problem. It may be the water pump also going bad and should have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com