Chevrolet City Express Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(14)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(14)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet City Express Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Chevrolet City ExpressL4-2.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Chevrolet City ExpressL4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Chevrolet City ExpressL4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Chevrolet City ExpressL4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Chevrolet City Express Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0

Rashad

18 years of experience
53 reviews
Rashad
18 years of experience
Chevrolet City Express L4-2.0L - Car is not starting - Fairburn, Georgia
Great mechanic

Nicholas

11 years of experience
589 reviews
Nicholas
11 years of experience
Chevrolet City Express L4-2.0L - Car is not starting - Durham, North Carolina
Very honest and upfront.

David

32 years of experience
107 reviews
David
32 years of experience
Chevrolet Avalanche 1500 V8-5.3L - Windows - Chandler, Arizona
David is an easy going and a incredible mechanic. He took care of the problem quickly and was very polite and professional. I will definitely be asking for him again in the future. I have already told friends about him.

Mitchel

24 years of experience
239 reviews
Mitchel
24 years of experience
Chevrolet Cruze L4-1.8L - Windows - Miami, Florida
Excelente servicio, muy profesional y fácil en el trato ... Excelent service, very professional

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0
Number of Chevrolet Windows Inspection services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

P2147 OBD-II Trouble Code: Malfunction with the Fuel Injector Group A Supply Voltage Circuit Low
P2147 P2147 code definition P2147 is a generic OBD-II diagnostic trouble code indicating a malfunction with the fuel injector group A supply voltage circuit low. What the P2147 code means The P2147 code means than the fuel injector group A...
P0921 OBD-II Trouble Code: Gear Shift Forward Actuator Circuit Range/Performance
P0921 means there is a problem with the gear shift forward actuator circuit, likely due to a faulty actuator or bad wiring.
How to Troubleshoot a Parking Brake or Emergency Brake That Won't Engage
Emergency brakes won't engage if the parking brake lever or pedal is out of adjustment or there are worn brake shoes or brake pads.

Car has rough idle and ticks.

If the engine has low compression on one cylinder it is usually an indication of a damaged valve seat or possibly a bad head gasket. If it is also accompanied by a ticking noise then there may be an issue...

replaced serpentine belt now no ac

If the a/c was working before you changed the belt and not it does not work and the belt squeaks then you may have put the belt on incorrect and it is blocking the a/c clutch from engaging. Check each...

I need the location for the oIL pressure sensor on the wife's 2013 ford flex

The switch is threaded into the engine block toward the front of the car. You may have to remove the underbody cover to see it and get physical access with the special socket that is used to remove this style...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com