Chevrolet Blazer Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(274)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(274)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Chevrolet Blazer Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Chevrolet BlazerV8-6.2L DieselService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Chevrolet BlazerV8-6.2L DieselService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1999 Chevrolet BlazerV6-4.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Chevrolet BlazerL4-2.5LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1988 Chevrolet BlazerV8-5.7LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2021 Chevrolet BlazerL4-2.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1969 Chevrolet BlazerV8-5.7LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1987 Chevrolet BlazerV8-5.0LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Blazer Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(274)

Rating Summary
253
7
3
4
7
253
7
3
4
7

John

27 years of experience
1019 reviews
John
27 years of experience
Chevrolet Blazer V6-4.3L - Spark Plugs - Houston, Texas
Very good mechanic and very quick on troubleshooting your vehicle issue. He completed my service in a very professional manner. He will tell you exactly what's wrong and whats needed for the repair. A good mechanic is hard to fine and hard to keep, and john is a keeper. I hope he is around for long time, you are lucky to have a mechanic like john come to you and fix your vehicle his service and time is needed.

John

27 years of experience
1019 reviews
John
27 years of experience
Chevrolet Blazer V6-4.3L - Brakes, Steering and Suspension Inspection - Houston, Texas
Great mechanic  Recommend to anyone!

Lewis

16 years of experience
118 reviews
Lewis
16 years of experience
Chevrolet Blazer V6-4.3L - Other Inspections - Dallas, Texas
Lewis came to my apartment my speaker on my phone was not working. I had to text Lewis for directions ,and he was understanding. I thought the problem with my car was worse than it actually was. Lewis checked everything to make sure that he diagnosed the problem appropriately. There were a number of things that could have caused my car to be acting up, but Lewis made sure he took all the necessary steps to diagnose the correct problem.

Tracy

35 years of experience
8 reviews
Tracy
35 years of experience
Chevrolet Blazer V8-5.7L - Grinding noise when key turns in ignition Inspection - Bakersfield, California
I liked how he knew right away what the problem was, I couldn't figure it out, he was professional and had a lot of useful information

Excellent Rating

(274)

Rating Summary
253
7
3
4
7
253
7
3
4
7
Number of Chevrolet Blazer services completed
3014+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Get a Wisconsin Driver's Permit
The The state of Wisconsin requires all new drivers under 18 to begin driving with an instruction permit, in order to practice safe driving under supervision before getting their full driver’s license. To receive the initial learner’s permit, you must...
P0791 OBD-II Trouble Code: Intermediate Shaft Speed Sensor “A” Circuit
P0791 means that there is an issue with the intermediate shaft speed sensor circuit due to a faulty sensor, solenoid, or wiring issues.
A 12 Point Guide to Electric Vehicle Tax Credits
Fully electric and plug-in hybrid cars bought after 2010 may be eligible for an up to $7,500 tax credit.

How do I use the dome light?

Your car’s dome light provides important illumination when entering or exiting the vehicle, particularly in low-light situations. However, you can adjust its operation so that it works (or doesn’t) when you want it. Here’s how: Locate the dome light. It’s...

Windows won't roll down or up on older model minivan

Check fuses #6 and #10 in the underhood fuse box. The regulators could be bad. There are also two relays involved in the window operation on the Freestar. If you are not familiar with electrical wiring, it may be best...

People say it's a hole in my muffler but I don't know.

Hello, thanks for writing in about your 2001 Buick Regal. While some mufflers are able to be repaired, it is often times not a very permanent fix depending on the condition of the muffler and where the hole is. For...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com