Chevrolet Blazer Excessive wear on outer edges of tire Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(279)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(279)

Excessive wear on outer edges of tire Inspection Service

How much does a Excessive wear on outer edges of tire Inspection cost?

On average, the cost for a Chevrolet Blazer Excessive wear on outer edges of tire Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1974 Chevrolet BlazerV8-7.4LService typeExcessive wear on outer edges of tire InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1988 Chevrolet BlazerV8-6.2L DieselService typeExcessive wear on outer edges of tire InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Chevrolet BlazerL4-2.5LService typeExcessive wear on outer edges of tire InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Chevrolet BlazerV6-3.6LService typeExcessive wear on outer edges of tire InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1972 Chevrolet BlazerV8-5.7LService typeExcessive wear on outer edges of tire InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1970 Chevrolet BlazerV8-5.7LService typeExcessive wear on outer edges of tire InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1972 Chevrolet BlazerL6-4.8LService typeExcessive wear on outer edges of tire InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2002 Chevrolet BlazerV6-4.3LService typeExcessive wear on outer edges of tire InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Blazer Excessive wear on outer edges of tire Inspection prices

Abnormal wearing on the tread of your tires is always cause for concern. Abnormal wear suggests that your wheels are not set right with the road, and therefore your car is not driving correctly. Worn tires are also at a great risk of blowing, making your car less safe to drive. Excessive wear on the outer edge of a tire is no exception.

How this system works:

Your car is designed to have all four wheels contact the road at a specific angle. This is called alignment. Over time, and for various reasons, the angle of your wheels can alter, and they will need to be realigned. Realigning the wheels simply returns them to their optimal angle. This angle allows all four wheels to work in unison with each other and with the suspension system, and makes for better turning. It also helps increase the longevity of your tires.

Common reasons for this to happen:

Excessive wear on the outer edge of a tire is almost always because your wheels are not aligned. But even though misalignment causes abnormal wear, it may not be the root of the problem. Oftentimes the misalignment is caused by a more serious problem.

  • Standard misalignment: Over time, and with generic wear and tear, your wheels will slowly shift, so that they are no longer at an optimal angle with the road. This can also happen when your tires are changed or your wheels are rotated, if a mechanic did not do a perfect job. Altering the angle of your wheels means altering the center of gravity, and altering what part of the tire makes the most contact with the road. If a wheel is misaligned in one direction, it will experience excessive wear on the outer edge, while a misalignment in the other direction will wear out the inner edge.

  • Sagging springs: Springs help support and distribute the weight of the vehicle. By doing so, springs help hold the vehicle up at the right height. As springs wear and tear, they begin to sag, and are no longer able to support the full weight of the car. If you’ve ever noticed a car that appears lower to the ground than it should be, it’s likely that the springs were sagging. This lowered height and lack of weight support puts excess force on the wheels, which will often result in the wheels becoming misaligned.

  • Worn out ball joints or control arms: The ball joints and control arms are vital pieces of your suspension system. The control arms connect the suspension to the frame of the car, while the ball joints (which act very similarly to human joints), connect the control arms to the steering knuckles. Because the ball joints and control arms are so close to the wheels, their function has an impact on the wheels. If the ball joints or control arms fail (the control arm bushings are particularly susceptible), then your wheels will absorb too much force from the road, and may be jarred such that they become misaligned.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of the excessive wear on the outer edges of the tires, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

A mechanic will thoroughly inspect your suspension, and your springs, to make sure that they locate the root of the excessive wear on the outer edge of your tires. If the problem lies with sagging springs, or broken control arms or ball joints, then those parts will need to be replaced before the vehicle is sent into a shop for a wheel alignment.

How important is this service?

Any service involving your tires is extremely important. Tires with excessive wear on the outer edge are more susceptible to blow out, and your car will not drive optimally. Furthermore, excessive outer wear suggests that there may be a larger, more severe problem with your vehicle, so you’ll went to get it inspected as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(279)

Rating Summary
258
7
3
4
7
258
7
3
4
7

Miguel

35 years of experience
258 reviews
Miguel
35 years of experience
Chevrolet Blazer V6-4.3L - Car is not starting - Jacksonville, Florida
Did a good job under the circumstances diagnosing my car.

Michael

25 years of experience
199 reviews
Michael
25 years of experience
Chevrolet Blazer V6-4.3L - Power Steering Pump Replacement - Charlotte, North Carolina
Very reliable

Jonathan

22 years of experience
304 reviews
Jonathan
22 years of experience
Chevrolet Blazer V6-4.3L - Windshield Wiper Linkage Replacement (Front) - Denver, Colorado
Didn't over-fix, only did what was needed. Also offered good advice. Kept me well updated about his timing/schedule/arrival.

Shaun

10 years of experience
542 reviews
Shaun
10 years of experience
Chevrolet Blazer V8-5.7L - Water Pump - Phoenix, Arizona
Great

Excellent Rating

(279)

Rating Summary
258
7
3
4
7
258
7
3
4
7
Number of Chevrolet Blazer services completed
3069+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Top 10 Tire Safety Issues Every Car Owner Needs to Know
Car tires are vulnerable to punctures, flats, and other failures. If you see underinflation, overinflation, or uneven tire wear, get it it inspected.
Is it Safe to Drive With a Hole In Your Exhaust?
The exhaust collects discarded gases from engine cylinders into one pipe. These gases are then delivered to the exhaust pipe...
P2011 OBD-II Trouble Code: Intake Manifold Runner Control Circuit Open Bank 2
P2011 P2011 trouble code definition The P2011 diagnostic trouble code indicates that the intake manifold runner control (IMRC) circuit in open in bank 2. Related Trouble Codes: P2004 OBD-II Trouble Code: Intake Manifold Runner Ctrl Stuck Open Bank 1 P2005...

Hazard light switch fell into dashboard

It sounds like the clips that hold the switch have broken. I would recommend having the hazard switch replaced (https://www.yourmechanic.com/services/hazard-turn-signal-flasher-replacement) by a certified technician.

There is a squeaking noise near the timing belt and an oil leak - 2007 Acura TSX

Hi there. It is likely the squeaky noise is either the timing belt tensioner wiggling on a dry pivot point or the timing belt idler pulley bearing which is losing its lubricating grease. Replacing the timing belt, the tensioner, and...

Car engine turns off and dies when car is put in reverse or drive.

Hello there, many common faults will cause your 2008 Nissan Altima to shut off when put in drive or reverse. The first step in diagnosis is to check the transmission for leaks, and the fluid level and condition. Once the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com