Chevrolet Astro Wheel Stud Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(141)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(141)

Wheel Stud Replacement Service

How much does a Wheel Stud Replacement cost?

On average, the cost for a Chevrolet Astro Wheel Stud Replacement is $148 with $53 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Chevrolet AstroV6-4.3LService typeWheel Stud - Driver Side Front ReplacementEstimate$221.89Shop/Dealer Price$258.62 - $346.29
1994 Chevrolet AstroV6-4.3LService typeWheel Stud - Driver Side Front ReplacementEstimate$201.89Shop/Dealer Price$238.63 - $326.32
2000 Chevrolet AstroV6-4.3LService typeWheel Stud - Driver Side Front ReplacementEstimate$201.89Shop/Dealer Price$238.63 - $326.32
1990 Chevrolet AstroL4-2.5LService typeWheel Stud - Driver Side Rear ReplacementEstimate$237.09Shop/Dealer Price$278.48 - $373.43
1998 Chevrolet AstroV6-4.3LService typeWheel Stud - Passenger Side Front ReplacementEstimate$201.89Shop/Dealer Price$238.65 - $326.35
1991 Chevrolet AstroV6-4.3LService typeWheel Stud - Passenger Side Front ReplacementEstimate$201.89Shop/Dealer Price$238.63 - $326.32
1998 Chevrolet AstroV6-4.3LService typeWheel Stud - Driver Side Rear ReplacementEstimate$243.59Shop/Dealer Price$284.83 - $379.67
2004 Chevrolet AstroV6-4.3LService typeWheel Stud - Driver Side Rear ReplacementEstimate$301.29Shop/Dealer Price$357.44 - $495.92
Show example Chevrolet Astro Wheel Stud Replacement prices

What are wheel studs and how do they work?

Wheel studs are high-strength, threaded steel fasteners that securely hold the wheel and tire assembly to the axle hub. Typically, there are 4 to 6 studs per wheel pressed or threaded into the wheel hub. The wheel and tire assembly is mounted on the hub centering ring and the studs protrude from the hub through the wheel mounting holes. Lug nuts are threaded onto the studs to securely hold the wheel to the hub.

When to consider replacing wheel studs:

  • Wheel is loose or wobbling. The wheel and tire assembly must be held evenly and securely to the wheel hub by the lug nuts attached to the studs. If the lug nuts are not tightened securely, it can cause the wheel to vibrate, loosen and wobble, which can damage or even break the wheel studs and lug nuts, potentially causing the wheel to separate from the vehicle.
  • Missing or broken studs, or damaged threads. If the stud is missing or broken, the lug nut attached to the stud will be missing and the wheel will hold securely. When the threads on the stud are worn, rusted away, or otherwise damaged, the lug nut may not achieve the required torque and could come loose while driving.
  • Stud turns in place when fastening lug nut. When the stud spins in the wheel hub while tightening, it should be replaced. During replacement, the mounting hole in the wheel hub should be inspected for damage.

How do mechanics replace wheel studs?

  • The car is raised and supported on steel jack stands.
  • The wheel and tire assembly, brake rotor, and caliper are removed.
  • On vehicles where there is sufficient access at the back of the wheel hub, a compact tool is used to press the defective stud out of the hub.
  • On vehicles where there is no access to use a compact stud remover, the wheel hub must be removed. When the hub must be pressed out of the steering knuckle, the wheel bearing is typically replaced in the process of removing the hub. Sometimes, the entire hub and bearing assembly with the studs included can be replaced.
  • The new stud or studs are pressed into position from the back of the hub, the brake caliper and rotor are reinstalled, and the wheel is placed onto the studs.
  • The wheel lug nuts are tightened to the factory specifications.

Is it safe to drive with wheel stud problems?

No, but you can temporarily drive a vehicle at low speeds and for short trips with one missing wheel stud. However, if more than two studs are broken, it is recommended to repair the car prior to further use. Having all wheel studs in place with evenly tightened lug nuts prevents distortion of the brake rotor. Over longer periods, missing studs can damage the brake rotor, the wheel, and the remaining studs. A car may vibrate when driving with missing wheel studs and can cause the other studs or lug nuts to loosen. This can lead to the wheel separating from your tire while driving.

When replacing wheel studs keep in mind:

  • Wheel studs are made of high-strength steel. If a stud has broken, it is typically due to previous overtightening. Lug nuts should be tightened using a calibrated torque wrench or a torque limiting device.
  • Published torque values assume that studs are dry, clean, and free of all lubricants. Oil, grease, anti-seize or any similar compound should not be applied to the threads of a wheel stud or lug nut.
  • Should a vehicle require removal of the wheel hub to add a new wheel stud, studs on the hub should be replaced. However, only defective studs need to be replaced if there is access from the back of the hub.
  • Lug nuts should be tightened in a star or crisscross pattern specified by the original equipment manufacturer in order to avoid warping of the brake rotor or drum as well as damaging the wheel.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(141)

Rating Summary
127
9
1
2
2
127
9
1
2
2

Christopher

27 years of experience
347 reviews
Christopher
27 years of experience
Chevrolet Astro V6-4.3L - Serpentine/Drive Belt - Tampa, Florida
very knowledgeable and a nice guy, honest when it comes to what needs to be done on vehicle, because of Chris, I will use and also recommend this service again

Mathew

17 years of experience
66 reviews
Mathew
17 years of experience
Chevrolet Astro V6-4.3L - Fuel Pump - Tarpon Springs, Florida
Extremely helpful and knowledgeable! Wonderful person and mechanic!

Kenneth

20 years of experience
777 reviews
Kenneth
20 years of experience
Chevrolet Astro V6-4.3L - Starter - Inglewood, California
Arrived on time, very friendly and professional. Better than great!

Marco

29 years of experience
222 reviews
Marco
29 years of experience
Chevrolet Astro V6-4.3L - Alternator - Riverside, California
Marco was awesome. Very knowledgeable and got job done fast.

Excellent Rating

(141)

Rating Summary
127
9
1
2
2
127
9
1
2
2
Number of Chevrolet Astro services completed
1551+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Buy Good Quality Struts
Vehicle Vehicle struts serve a number of different purposes, including adding control to extreme handling conditions such as sudden turning and braking. They also serve to provide a level of comfort to passengers in the vehicle as they provide a...
How to Prepare for the Tennessee Driver’s Written Test
As As excited as you might be to get out and start driving, you have to take and pass the Tennessee driver’s written test first so you can get your permit and then take the road test. Many people become...
What Does the Check Engine Warning Light Mean?
The check engine warning light means there is a problem with the vehicle's engine. This could be due to faulty spark plugs or defective sensors.

Key stuck in ignition

If the key is turning to the “lock” position and won’t come out, the lock cylinder is faulty. If it is not turning all the way back, there is a solenoid that is malfunctioning in the steering column. That solenoid...

My air conditioner is not working on my 2006 Honda Odyssey, do you think it is the clutch

Hello. It is possible that the clutch or the compressor is bad, but most of the time on this vehicle the primary cause of an air conditioning failure when the system is full is a bad clutch relay. The relay...

I’m in O’Fallon Missouri, I would like reviews for Missouri do you have any recent ones ?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com