Cadillac XTS Grease on inner edge of tires Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(61)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(61)

Grease on inner edge of tires Inspection Service

How much does a Grease on inner edge of tires Inspection cost?

On average, the cost for a Cadillac XTS Grease on inner edge of tires Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Cadillac XTSV6-3.6LService typeGrease on inner edge of tires InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2013 Cadillac XTSV6-3.6LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2018 Cadillac XTSV6-3.6L TurboService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Cadillac XTSV6-3.6L TurboService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2017 Cadillac XTSV6-3.6LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2015 Cadillac XTSV6-3.6L TurboService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2015 Cadillac XTSV6-3.6LService typeGrease on inner edge of tires InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2019 Cadillac XTSV6-3.6LService typeGrease on inner edge of tires InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Cadillac XTS Grease on inner edge of tires Inspection prices

Grease is an important protectant for many parts of your car. While it isn’t used in your engine, it is used in several other areas, including the CV joints on your axles, as well as the grease fittings on your suspension (many newer cars have sealed fittings that aren’t serviceable today). It’s also used in rear-wheel drive applications – a truck’s driveshaft may have one or even two grease fittings. However, if you’re noticing grease on the inner edge of your tires, it means that something has potentially gone wrong.

How this system works:

There are a couple of places that grease on the inner edge of your tires might have come from. The most likely is from the CV joint. CV axles, or constant velocity axles, are used in front-wheel drive cars to connect the wheel hubs to the transmission. They have two joints, one close to either end. The joints are made to be flexible, so that your car can travel over bumps and dips easily without losing traction.

The joints are flexible, and include moving parts. To protect them from damage from dust, debris and other threats, they’re covered by rubber “boots” filled with grease. This ensures that they’re constantly lubricated, and that dust and debris cannot enter and damage the joints.

However, over time, your boots wear. The rubber can become brittle from age, and can crack. Boots can also be torn through impact with debris in the road and more. When this happens, the grease can leak out, and dirt and debris can enter the joint.

Common reasons for this to happen:

  • Blown CV Boot: If you’ve noticed grease on the inner edge of your tires, there’s a chance that one of your CV boots has blown and is leaking grease out. This is a serious situation. Without grease, the joint is not properly lubricated. Even more worrying, dirt and debris can enter the CV joint and cause serious damage, requiring the entire joint to be replaced. If the situation is caught early, it’s possible that only the boot will need to be replaced.

  • Damaged Grease Fitting: Some vehicles have grease fittings on their suspension system that enable moving parts to move more easily with lubrication. If one of these is damaged, it’s possible that some of the grease may leak onto the edge of your wheel from a nearby grease fitting.

  • Recent Lubrication of Grease Fittings: Once upon a time, an “oil and lube” service really lived up to its name, with all of a car’s grease fittings being lubricated during normal maintenance. With most newer cars now having sealed systems, this has become less common. However, if your car has serviceable fittings, it’s possible that grease from a recent service somehow ended up on the inner edge of the tire.

  • Recent CV Boot or Axle Replacement: If you’ve already had a CV boot blow out and the axle has been rebooted, or a new CV axle has been installed, it’s possible that the mechanic did not clean off the inner edge of the tire after the repair.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the CV axles, boots, grease fittings and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your CV axles and boots, as well as any grease fittings on your front suspension in order to determine the source of the grease on the inner edge of your tires. The mechanic may also need to test drive the vehicle to test for symptoms of a failed CV joint, which include clicking during turning, or a vibration while driving.

How important is this service?

If the problem is with your CV boots, having the situation corrected is critical. While it’s possible to reboot a CV axle before the boot blows entirely, or immediately afterward, any use of the vehicle with the boot blown can contaminate the CV joint with dust and dirt. This will eat into the joint itself, causing irreparable damage and requiring the entire axle to be replaced. If you’ve noticed grease on the inner edge of your tires, one of our professional mechanics can diagnose and repair the condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(61)

Rating Summary
56
3
0
0
2
56
3
0
0
2

Nick

7 years of experience
12 reviews
Nick
7 years of experience
Cadillac XTS V6-3.6L - Car Thermostat Replacement - Houston, Texas
Nick was on time and did a great job.

Michael

38 years of experience
135 reviews
Michael
38 years of experience
Cadillac XTS V6-3.6L - Transmission Fluid Service - Fullerton, California
Seems like a good mechanic

Behrak

9 years of experience
325 reviews
Behrak
9 years of experience
Cadillac XTS V6-3.6L - Turn Signal Bulb Replacement (Front) - Alpharetta, Georgia
Behrak arrived early and performed the repair quickly at a fraction of the cost the dealer wanted to charge. I’m very pleased with his work.

Billy

22 years of experience
13 reviews
Billy
22 years of experience
Cadillac XTS V6-3.6L - Pre-purchase Car Inspection - Houston, Texas
Very professional with great feedback!

Excellent Rating

(61)

Rating Summary
56
3
0
0
2
56
3
0
0
2
Number of Cadillac XTS services completed
671+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
900+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Maryland
Maryland may be a small state, but it’s big on diversity. From the mountains in the west to the Atlantic Ocean in the east, the terrain and sights are varied enough to keep even the most weary traveler alert. Historic...
How to Prepare for the Nevada Driver’s Written Test
You You are probably excited about the prospect of driving and taking to the open road. There’s nothing quite like that feeling of freedom. However, you have to realize that driving means you need to be responsible and that you...
P0367 OBD-II Trouble Code: Camshaft Position Sensor "B" Circuit Low (Bank 1)
Trouble code P0367 means the camshaft position sensor B circuit is too low, often due to oil or other fluids leaking into the sensors or wires.

I can hear clicking, but truck won't start.

If the lights are fully illuminated, the starter or it's circuit is the most likely cause of your problem. However, an internal engine problem or problems with the battery could also be the cause. A trained technician will be able...

Why can't i fix O2 sensor problem

In many circumstances, the O2 sensors are not the only culprit of a lean fuel curve. In many cases, a clogged fuel injector (https://www.yourmechanic.com/services/fuel-injector-replacement) nozzle can also trigger the most common OBD-II error code (P-2191) (https://www.yourmechanic.com/article/p2191-obd-ii-trouble-code-system-too-lean-at-higher-load-bank-1-by-jay-safford) that indicates a lean...

I think I blew the motor, I went through a deep puddle if water.

Hi there. If you see a hole in the bottom of the engine and oil is coming out (https://www.yourmechanic.com/services/oil-fluid-leak-inspection) and the engine will not crank over, then your vehicle has thrown a rod due to hydro locking a cylinder. The...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com