Cadillac SRX Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(356)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(356)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Cadillac SRX Throttle Body Replacement is $294 with $154 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Cadillac SRXV6-3.6LService typeThrottle Body ReplacementEstimate$1093.26Shop/Dealer Price$1317.90 - $1970.56
2007 Cadillac SRXV6-3.6LService typeThrottle Body ReplacementEstimate$826.33Shop/Dealer Price$982.97 - $1442.09
2015 Cadillac SRXV6-3.6LService typeThrottle Body ReplacementEstimate$705.95Shop/Dealer Price$849.19 - $1271.60
2013 Cadillac SRXV6-3.6LService typeThrottle Body ReplacementEstimate$729.39Shop/Dealer Price$878.49 - $1318.48
2004 Cadillac SRXV6-3.6LService typeThrottle Body ReplacementEstimate$618.39Shop/Dealer Price$726.98 - $1033.09
2014 Cadillac SRXV6-3.6LService typeThrottle Body ReplacementEstimate$729.39Shop/Dealer Price$878.74 - $1318.91
2008 Cadillac SRXV8-4.6LService typeThrottle Body ReplacementEstimate$807.81Shop/Dealer Price$963.25 - $1419.26
2010 Cadillac SRXV6-2.8L TurboService typeThrottle Body ReplacementEstimate$698.87Shop/Dealer Price$840.34 - $1257.44
Show example Cadillac SRX Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(356)

Rating Summary
329
17
3
2
5
329
17
3
2
5

Luke

16 years of experience
19 reviews
Luke
16 years of experience
SRX 2013 - Power Steering Fluid Service - Leander, TX
Very good

CURTIS

5 years of experience
8 reviews
CURTIS
5 years of experience
SRX 2011 - Brake Pads - Philadelphia, PA
I have a parking brake service light popping up on my dash since I’ve had my brakes changed why

Andrew

5 years of experience
865 reviews
Andrew
5 years of experience
SRX 2010 - Oil/Fluid Leak - Shawnee Mission, KS
Andrew did a great job, analyzing the issue with my vehicle. Highly recommended.

Nicholas

8 years of experience
518 reviews
Nicholas
8 years of experience
SRX 2004 - Electrical components are not working - Garner, NC
Very professional

Excellent Rating

(356)

Rating Summary
329
17
3
2
5
329
17
3
2
5
Number of Cadillac SRX services completed
3916+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

P2420 OBD-II Trouble Code: Evaporative Emission (EVAP) Switching Valve Control Circuit High
P2420 P2420 code definition Evaporative Emission (EVAP) Switching Valve Control Circuit High What the P2420 code means The P2420 trouble code indicates that the Engine Control Module (ECM) has detected a malfunction within the switching control circuit of the EVAP...
How to Clean an EGR Valve
The The EGR valve is the heart of the emissions system on an engine. EGR is an acronym for Exhaust Gas Recirculation, and that is exactly what it does. This wonderful environmentally-friendly device opens up during certain engine conditions and...
How to Get Ice Off Your Windshield
Windshields need de-icying when ice accumulates in winter. Ice is removed by scraping with a credit card, spraying de-icer, or using warm water.

Having trouble trying to locate my knock sensor. It's throwing a code for it. 1,2,4,5,6 cylinder misfires

As you may know a knock sensor may fail for any of the following reasons: The knock sensor is faulty and needs to be replaced There is a wiring open/short/fault in the knock sensor circuit The PCM/ECM has failed Any...

Slow acceleration with loud full body vibrations 2005 Ford Focus

Hello - it is quite likely that one or both the axles/CV joint assemblies (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-axle-cv-shaft-assembly) on your Focus are worn out. Loose motion from wear in the CV joints causes a distorted motion of the axle, and vibration as your...

Limp mode

Hello, thank you for writing in. The Limp Mode is activated as a safety precaution due to the computer detecting an issue that will potentially cause further damage. There are a wide variety of sensors that are inputs for the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com