Cadillac Seville Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(111)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(111)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Cadillac Seville Car Thermostat Replacement is $207 with $67 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Cadillac SevilleV8-4.9LService typeCar Thermostat ReplacementEstimate$326.82Shop/Dealer Price$376.08 - $509.67
2003 Cadillac SevilleV8-4.6LService typeCar Thermostat ReplacementEstimate$343.41Shop/Dealer Price$395.97 - $546.45
1994 Cadillac SevilleV8-4.6LService typeCar Thermostat ReplacementEstimate$343.41Shop/Dealer Price$396.02 - $546.52
1992 Cadillac SevilleV8-4.9LService typeCar Thermostat ReplacementEstimate$317.81Shop/Dealer Price$364.02 - $495.32
2002 Cadillac SevilleV8-4.6LService typeCar Thermostat ReplacementEstimate$343.41Shop/Dealer Price$398.59 - $551.03
2000 Cadillac SevilleV8-4.6LService typeCar Thermostat ReplacementEstimate$343.41Shop/Dealer Price$396.26 - $546.95
1990 Cadillac SevilleV8-4.5LService typeCar Thermostat ReplacementEstimate$317.81Shop/Dealer Price$364.04 - $495.37
1991 Cadillac SevilleV8-4.9LService typeCar Thermostat ReplacementEstimate$317.81Shop/Dealer Price$364.02 - $495.32
Show example Cadillac Seville Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(111)

Rating Summary
104
5
0
0
2
104
5
0
0
2

Raymond

28 years of experience
280 reviews
Raymond
28 years of experience
Cadillac Seville V8-4.6L - Strut Assembly Replacement (Front) - Hesperia, California
Very professional and knowledgeable!

Anthony

18 years of experience
39 reviews
Anthony
18 years of experience
Cadillac Seville V8-4.6L - Car is overheating - Antioch, California
Best mechanic ever

Ira

49 years of experience
283 reviews
Ira
49 years of experience
Cadillac Seville V8-4.6L - Brake Pads Replacement (Front, Rear) - Wimauma, Florida
Very informative and well mannered.

Kiri

21 years of experience
372 reviews
Kiri
21 years of experience
Cadillac Seville V8-4.6L - Camshaft Position Sensor - Upper Darby, Pennsylvania
Definitely will use again !

Excellent Rating

(111)

Rating Summary
104
5
0
0
2
104
5
0
0
2
Number of Cadillac Seville services completed
1221+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Replace a Stay Rod
Classic cars have stay rods that fail if there are rattling noises coming from the vehicle or if the radiator is loose or moving.
How to Adjust Drive Belts
Drive belts power electrical systems and other features in your car. An improperly adjusted drive belt can cause damage to your engine.
How to Be a Professional Race Car Driver
Few Few sports are as full of adrenaline and excitement as car racing. There’s a reason that little kids love their Hot Wheels model cars, and pre-teens love playing racing video games, and teenagers can’t wait to get behind the...

rubbing or rotating type of sound from rear wheel passenger side

Hello there. A few potential problems could cause a rubbing noise from the rear of the vehicle. The most common would be the wheel bearings (https://www.yourmechanic.com/services/wheel-bearings-replacement), brake drum (https://www.yourmechanic.com/services/brake-drum-replacement), dragging parking brake (https://www.yourmechanic.com/services/parking-brake-is-stuck-inspection), or damaged wheel. If you want to...

My car is overheating - 2007 GMC Yukon XL 2500

As you may know, overheating can be caused by many different things such as a clogged radiator, a faulty thermostat, a bad coolant fan switch, or potentially a blown head gasket. The heater will usually not work properly when you...

Throttle Position Sensor

Hi There, It sounds like what you are describing is an intermittent throttle response when pressing the gas pedal. If this is correct, this may be related to the throttle position sensor. The throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) monitors the throttle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com