Cadillac Seville Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(111)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(111)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Cadillac Seville Fuel Injector Replacement is $772 with $632 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Cadillac SevilleV8-4.6LService typeFuel Injector ReplacementEstimate$2536.70Shop/Dealer Price$3125.45 - $4871.84
2004 Cadillac SevilleV8-4.6LService typeFuel Injector ReplacementEstimate$2001.19Shop/Dealer Price$2411.61 - $3623.37
1999 Cadillac SevilleV8-4.6LService typeFuel Injector ReplacementEstimate$3077.63Shop/Dealer Price$3757.28 - $5776.47
1994 Cadillac SevilleV8-4.6LService typeFuel Injector ReplacementEstimate$2777.01Shop/Dealer Price$3424.71 - $5357.59
1998 Cadillac SevilleV8-4.6LService typeFuel Injector ReplacementEstimate$3077.63Shop/Dealer Price$3764.24 - $5788.64
1992 Cadillac SevilleV8-4.9LService typeFuel Injector ReplacementEstimate$3072.86Shop/Dealer Price$3778.38 - $5879.97
1993 Cadillac SevilleV8-4.6LService typeFuel Injector ReplacementEstimate$2733.21Shop/Dealer Price$3379.97 - $5312.14
1997 Cadillac SevilleV8-4.6LService typeFuel Injector ReplacementEstimate$2524.09Shop/Dealer Price$3108.56 - $4851.75
Show example Cadillac Seville Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(111)

Rating Summary
104
5
0
0
2
104
5
0
0
2

Zachary

18 years of experience
31 reviews
Zachary
18 years of experience
Cadillac Seville V8-4.6L - Car is not starting - Cape Coral, Florida
Zachary was very polite and professional. He was patient with me and explained everything he was doing, step by step. He also gave me information on my car that I didn't know as well as tips to keep my Cadillac in top running performance. I will recommend him as well as other YourMechanic experts to everyone. Thank you Zachary!

Joel

22 years of experience
987 reviews
Joel
22 years of experience
Cadillac Seville V8-4.6L - Coolant is leaking - Jacksonville, Florida
He knew what he was doing and did a great job!

Michael

10 years of experience
7 reviews
Michael
10 years of experience
Cadillac Seville V8-4.6L - Brake Pads Replacement (Front) - Seattle, Washington
Pleasant guy! Straight foward and honest. He drove all the way to Seatac during rush hour to pick up an extra part that he found out i needed. Also worked diligently in the freezing cold to replace my breaks. Breaks work great now! Would recommed this service and Michael to my friends and family!

Guan

7 years of experience
71 reviews
Guan
7 years of experience
Cadillac Seville V8-4.6L - Smoke from engine or exhaust - Sacramento, California
Guan was great! Very knowledgable and explained the car issues in detail to a mechanical novice.

Excellent Rating

(111)

Rating Summary
104
5
0
0
2
104
5
0
0
2
Number of Cadillac Seville services completed
1221+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Strut Assembly
Common signs include knocking noises when driving over bumps, a bumpy ride, floating front end, and uneven tire wear.
What Is a Voltage Drop Test?
Here’s Here’s the problem – your engine is cranking slowly, or maybe not cranking at all, but the battery and starter are both working just fine. Or your alternator is charging normally, but it’s not keeping your battery charged. Obviously,...
What Are California's Emissions Standards?
California California is one of the most heavily populated states in the country. There are more vehicles on the road there than almost anywhere else in the country (statewide). Because of this, the state has had to adopt very strict...

Non-ethanol fuel

Hi There, Your truck should run just fine with non-ethanol fuel and in fact may run a bit better with pure non-ethanol fuel. Many of today’s engines are equipped to run on E85 fuel which is a high ethanol content...

How do I fix this? 2002 Hyundai xg350 Transmission Control Relay Always On: I replaced the TCM, no fuses are blown. Still broken.

The only way to fix this issue is to go through the test protocol (diagnostic decision tree) in the Hyundai factory service manual. In particular, for this code (P1723) the circuit to and from the module has to be tested...

engine makes a rattle noise on cold start. Noise goes away as it gets warm. When i turn on the ac the rattling noise is louder.

Among the possible sources of this noise are accessory drives (pulleys, alternator, etc.), the timing belt (or serpentine belt) tensioner, and loose heat shields. The fact that use of the a/c worsens the noise would point toward the serpentine belt...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com