Cadillac Escalade ESV Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(159)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(159)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Cadillac Escalade ESV Car Thermostat Replacement is $234 with $94 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Cadillac Escalade ESVV8-6.2LService typeCar Thermostat ReplacementEstimate$426.24Shop/Dealer Price$487.37 - $650.92
2011 Cadillac Escalade ESVV8-6.2LService typeCar Thermostat ReplacementEstimate$413.63Shop/Dealer Price$470.43 - $630.73
2003 Cadillac Escalade ESVV8-6.0LService typeCar Thermostat ReplacementEstimate$334.69Shop/Dealer Price$385.12 - $529.08
2004 Cadillac Escalade ESVV8-6.0LService typeCar Thermostat ReplacementEstimate$339.35Shop/Dealer Price$390.94 - $538.40
2008 Cadillac Escalade ESVV8-6.2LService typeCar Thermostat ReplacementEstimate$413.63Shop/Dealer Price$474.10 - $637.15
2010 Cadillac Escalade ESVV8-6.2LService typeCar Thermostat ReplacementEstimate$413.63Shop/Dealer Price$470.83 - $631.43
2015 Cadillac Escalade ESVV8-6.2LService typeCar Thermostat ReplacementEstimate$493.07Shop/Dealer Price$569.83 - $789.78
2012 Cadillac Escalade ESVV8-6.2LService typeCar Thermostat ReplacementEstimate$410.85Shop/Dealer Price$467.01 - $625.27
Show example Cadillac Escalade ESV Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(159)

Rating Summary
151
5
1
0
2
151
5
1
0
2

Patrick

8 years of experience
101 reviews
Patrick
8 years of experience
Cadillac Escalade ESV V8-6.2L - Check Engine Light is on - Suwanee, Georgia
Logical and prudent approach.

Scott

26 years of experience
10 reviews
Scott
26 years of experience
Cadillac Escalade ESV V8-6.0L - Oil Change - Las Vegas, Nevada

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Cadillac Escalade ESV V8-6.2L - Exterior Door Handle Replacement (Driver Side Front) - Layton, Utah
On time, professional

Michael

26 years of experience
199 reviews
Michael
26 years of experience
Cadillac Escalade ESV V8-6.2L - Oil Pan Gasket - Charlotte, North Carolina
Michael was on time, knowledgeable, friendly and considerate of our time. He took the time to chat, but was professionally competent enough to know he had a job to do. We had a slight hikkup which Michael handled very professionally. Much appreciated!

Excellent Rating

(159)

Rating Summary
151
5
1
0
2
151
5
1
0
2
Number of Cadillac Escalade ESV services completed
1749+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

P0642 OBD-II Trouble Code: Sensor Reference Voltage “A” Circuit Low
P0642 means there is an abnormally low voltage reading within the "A" circuit often due too a faulty engine control module or other malfunctions.
The Traveler’s Guide to Driving in the UK (England, Scotland, Wales, and Northern Ireland)
The The UK – England, Scotland, Wales, and Northern Ireland – has a veritable treasure trove of places that you will want to visit. In fact, you might need to take several trips and you will still only see a...
How to Create an Emergency Kit for Your Car
Driving Driving is safer than it ever has been before; and yet, you never know what might happen when you are driving. Your car can break down or experience a mechanical failure. You could get in an accident or injure...

P0113 code high input...changed MAF and ran for 5 minutes then began to idle pop or burp again

The code P0113 (https://www.yourmechanic.com/article/diagnostic-trouble-code-dtc-p0113-by-jay-safford) is for the inlet air temperature sensor not being correct. In order to test the sensor, you will need a scanner that can access the data of the computer to see what the input temperature the...

How much to flush out system cause car has no heat

The heater core being plugged is not the most common cause for this vehicle to not give heat out of the vents. If you move controls to heat and do not notice a temperature change when turned hotter the most...

Hard to get car in reverse once it goes in its fine but hard to get in.at first it was fine and gradually got worse

This may suggest the transmission synchros may be wearing out. Your transmission has small gear synchronizer rings that help to move the transmission in and out of the various gears. When these begin to wear out, you may notice it...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com