Cadillac Allante Grease on inner edge of tires Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15)

Grease on inner edge of tires Inspection Service

How much does a Grease on inner edge of tires Inspection cost?

On average, the cost for a Cadillac Allante Grease on inner edge of tires Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Cadillac AllanteV8-4.5LService typeGrease on inner edge of tires InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1993 Cadillac AllanteV8-4.6LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1991 Cadillac AllanteV8-4.5LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1987 Cadillac AllanteV8-4.1LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
1990 Cadillac AllanteV8-4.5LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
1988 Cadillac AllanteV8-4.1LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1992 Cadillac AllanteV8-4.5LService typeGrease on inner edge of tires InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
Show example Cadillac Allante Grease on inner edge of tires Inspection prices

Grease is an important protectant for many parts of your car. While it isn’t used in your engine, it is used in several other areas, including the CV joints on your axles, as well as the grease fittings on your suspension (many newer cars have sealed fittings that aren’t serviceable today). It’s also used in rear-wheel drive applications – a truck’s driveshaft may have one or even two grease fittings. However, if you’re noticing grease on the inner edge of your tires, it means that something has potentially gone wrong.

How this system works:

There are a couple of places that grease on the inner edge of your tires might have come from. The most likely is from the CV joint. CV axles, or constant velocity axles, are used in front-wheel drive cars to connect the wheel hubs to the transmission. They have two joints, one close to either end. The joints are made to be flexible, so that your car can travel over bumps and dips easily without losing traction.

The joints are flexible, and include moving parts. To protect them from damage from dust, debris and other threats, they’re covered by rubber “boots” filled with grease. This ensures that they’re constantly lubricated, and that dust and debris cannot enter and damage the joints.

However, over time, your boots wear. The rubber can become brittle from age, and can crack. Boots can also be torn through impact with debris in the road and more. When this happens, the grease can leak out, and dirt and debris can enter the joint.

Common reasons for this to happen:

  • Blown CV Boot: If you’ve noticed grease on the inner edge of your tires, there’s a chance that one of your CV boots has blown and is leaking grease out. This is a serious situation. Without grease, the joint is not properly lubricated. Even more worrying, dirt and debris can enter the CV joint and cause serious damage, requiring the entire joint to be replaced. If the situation is caught early, it’s possible that only the boot will need to be replaced.

  • Damaged Grease Fitting: Some vehicles have grease fittings on their suspension system that enable moving parts to move more easily with lubrication. If one of these is damaged, it’s possible that some of the grease may leak onto the edge of your wheel from a nearby grease fitting.

  • Recent Lubrication of Grease Fittings: Once upon a time, an “oil and lube” service really lived up to its name, with all of a car’s grease fittings being lubricated during normal maintenance. With most newer cars now having sealed systems, this has become less common. However, if your car has serviceable fittings, it’s possible that grease from a recent service somehow ended up on the inner edge of the tire.

  • Recent CV Boot or Axle Replacement: If you’ve already had a CV boot blow out and the axle has been rebooted, or a new CV axle has been installed, it’s possible that the mechanic did not clean off the inner edge of the tire after the repair.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the CV axles, boots, grease fittings and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your CV axles and boots, as well as any grease fittings on your front suspension in order to determine the source of the grease on the inner edge of your tires. The mechanic may also need to test drive the vehicle to test for symptoms of a failed CV joint, which include clicking during turning, or a vibration while driving.

How important is this service?

If the problem is with your CV boots, having the situation corrected is critical. While it’s possible to reboot a CV axle before the boot blows entirely, or immediately afterward, any use of the vehicle with the boot blown can contaminate the CV joint with dust and dirt. This will eat into the joint itself, causing irreparable damage and requiring the entire axle to be replaced. If you’ve noticed grease on the inner edge of your tires, one of our professional mechanics can diagnose and repair the condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(15)

Rating Summary
14
0
1
0
0
14
0
1
0
0

Ben

41 years of experience
1433 reviews
Ben
41 years of experience
Cadillac Allante V8-4.1L - Brake System Flush - Houston, Texas
On time and good job.

Daniel

11 years of experience
228 reviews
Daniel
11 years of experience
Cadillac Allante V8-4.5L - Water Pump - Melrose Park, Illinois
im a mechanic ,cant work on cars no more ,due to back injury,daniels a pro,and he will be called for any future work

Travis

13 years of experience
594 reviews
Travis
13 years of experience
Cadillac Allante V8-4.5L - Spark Plug Replacement - Minneapolis, Minnesota
TRAVIS WENT OVER THE TOP FOR !!!!!! YOU PEOPLE ARE VERY VERY LUCKY TO HAVE HIM, HE REALLY KNOWS HIS BUSINESS AND HE KNOWS HOW TO GET IT DONE, I WILL RECOMMED HIM TO MANY PEOPLE IN OUR CAR CLUB. THANKS AGAIN FOR A PERFECT JOB !!!!!!!!!!!!!

William

34 years of experience
543 reviews
William
34 years of experience
Cadillac Allante V8-4.1L - Serpentine/Drive Belt Replacement - Surprise, Arizona
Couldn't be happier with William and your come to the house service as well. William is a gem.

Excellent Rating

(15)

Rating Summary
14
0
1
0
0
14
0
1
0
0
Number of Cadillac Allante services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
900+
experts on our platform

Recent articles & questions

Do Cars Need Oil Changes More or Less Often As They Age?
Car engines wear out as miles add up. Older engines and engines with high mileage have lower tolerances, making more frequent oil changes necessary.
How to Prevent Motor Oil Sludge
Regular oil changing in your car helps prevent sludge. Motor oil sludge can cause worse gas mileage, low oil pressure, and damage to engine parts.
How Long Do Spark Plugs Last?
In In order to operate, your engine needs fuel and air. However, those two things alone won’t make it run. It needs a way to ignite the fuel after mixing it with air from the intake. That’s what your car’s...

I have a code reader and it show P0446 mod$10 1 of 1 evap emission control system

Hi. Diagnostic Trouble Codes do not identify the parts that are faulty. Codes merely set as a consequence of the Engine Computer receiving out of range data. If a wire is corroded in a multiplexed "system" with ten sensors the...

I have a 1997 nissan maxima that has a misfire code of p0300 and p0302.

It's common to find the source of a misfire in the ignition system. Checking the coils with an Ohmmeter doesn't really tell you much though. When I diagnose a misfire, sometimes I find it helpful to swap the coils and...

Can a 42re transmission hook up to a 5.9 L Magnum gas engine

The 42RE will "fit" but it is definitely not a "direct" fit as in a catalog interchange. The 42RE is a light duty vehicle transmission and thus the torque rating (power handling capability) is lower than that of the 46RE....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com