Cadillac 60 Special Clutch is not fully disengaging Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,817)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,817)

Clutch is not fully disengaging Inspection Service

How much does a Clutch is not fully disengaging Inspection cost?

On average, the cost for a Cadillac 60 Special Clutch is not fully disengaging Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Cadillac 60 SpecialV8-4.9LService typeClutch is not fully disengaging InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Cadillac 60 Special Clutch is not fully disengaging Inspection prices

Your car’s clutch is what allows you to change gears. When you press the clutch pedal, the clutch moves away from flywheel, stopping the rotation and allowing you to shift to a higher or lower gear without causing damage (grinding gears does your transmission no good at all). When you release the clutch pedal, the clutch should press up against the flywheel and you should be able to proceed in the newly selected gear. However, there are some situations in which the clutch may not fully disengage.

How this system works:

To put it in a nutshell, clutches work based on friction. When the clutch pedal is pressed, either a cable or a piston (depending on the type of clutch is installed in your vehicle) will push the release fork. This causes the throw out bearing to press against the diaphragm spring.

The center of the spring is pushed in, which engages a series of pins. These pull the pressure plate away from the clutch disc and separate the clutch from the engine flywheel. When you take your foot off the pedal, the reverse happens, and the clutch is engaged.

Clutch components are subject to a significant amount of wear and tear (because they work on friction – this is normal). The most common problem here is the disc wearing. The material is a lot like what you’ll find on your brake pads, and the operating concept is also very similar. Of course, that creates slippage, which isn’t the problem here. Failure to disengage is called “sticking”, and there are several potential causes.

Common reasons for this to happen:

  • Stretched/Broken Clutch Cable: If the clutch cable is broken or stretched, then the clutch will stick (not disengage). You’ll notice the sticking becoming more and more common as the cable continues to stretch.

  • Leaking Hydraulic System: If you have a hydraulic clutch, it’s possible that either the slave or master cylinder (or both) is leaking. This means that insufficient hydraulic pressure is built up for the clutch system to operate correctly.

  • Misadjusted Linkage: The linkage connects the clutch pedal to the transmission. If it’s incorrectly adjusted, the clutch may not disengage properly.

  • Incompatible Aftermarket Parts: If you’ve recently had clutch work done, it’s possible that aftermarket components were installed in your car. Not all aftermarket parts will work correctly with your clutch, and this can cause it to not fully disengage.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire clutch system and determine the source and cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the clutch, as well as the cable or hydraulic system. Both a visual inspection and a test drive may be required. Once the underlying cause has been determined, the mechanic will recommend the next step.

How important is this service?

If your clutch is not fully disengaging, it means that the flywheel and clutch disc are not fully separating. This causes additional wear not only on the clutch material, but on other components in the system (including the input shaft).

The best defense against transmission problems is to ensure that you work with a reputable mechanic for general maintenance who can inspect and troubleshoot problems as they arise. It’s also important to ensure that any aftermarket clutch components installed are fully compatible with your vehicle. If you’re experiencing problems with the clutch not fully disengaging, one of our professional mechanics can inspect and repair the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(2,817)

Rating Summary
2,647
88
18
16
48
2,647
88
18
16
48

Richard

21 years of experience
461 reviews
Richard
21 years of experience
Cadillac CTS V6-3.6L - Engine is misfiring - Smyrna, Georgia
He knows what he doing, that's all you need to know.

Tyrone

11 years of experience
423 reviews
Tyrone
11 years of experience
Cadillac SRX V6-3.0L - Trunk does not lock or open - Washington, District of Columbia
customer friendly and knowledgeable

Refugio

17 years of experience
51 reviews
Refugio
17 years of experience
Cadillac DTS V8-4.6L - Electrical components are not working - San Antonio, Texas
Very Helpful

Brandon

20 years of experience
773 reviews
Brandon
20 years of experience
Cadillac DeVille V8-4.6L - Radiator - Ocoee, Florida
Very professional and was able to complete the work to my satisfaction.

Excellent Rating

(2,817)

Rating Summary
2,647
88
18
16
48
2,647
88
18
16
48
Number of Cadillac services completed
30987+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
900+
experts on our platform

Recent articles & questions

Common Signs Your Drive Belt Needs Replacement
A car drive or serpentine belt keeps your engine running smoothly. Unusual noises from the engine and visible belt wear means it needs replacement.
P2179 OBD-II Trouble Code: System Too Lean Off Idle Bank 2
P2179 P2179 code definition System Too Lean Off Idle Bank 2 What the P2179 code means This code indicates that there is a lean air fuel mixture on bank 2 of the engine. Bank 2 refers to the set of...
P0815 OBD-II Trouble Code: Upshift Switch Circuit
What What the P0815 code means Your vehicle’s powertrain control module (PCM) has recognized a problem in the electrical circuit of the upshift switch circuit. The upshift/downshift switch is located in the passenger compartment near your vehicle’s shifter. Please note...

How do I install the head restraints?

It is very easy to install the heat restraints after you have removed them. To do so, simply place the restraint legs into the installation holes, and push down until the restraint locks into place. Then press and hold the...

Cat monitor will not run, even though i've done the 55 mph for 5 minutes or more numerous times....

If the cat monitor will not finish and pass after multiple tries then you may have a weak sensor or a catalyst (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-catalytic-converter) that is bad. I'd suggest having the vehicle scanned to test the O2 sensors for slow or...

I was just told that a tensioner or pulley could have caused my alternator to go bad and if not replaced could make the new one go

Pulleys do go bad because the grease in the pulley bearing dries out, the ball bearings and bearing races get pitted and then the pulley becomes noisy. Sometimes, the pulley will actually seize. However, it will be EASILY evident if...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com