Buick Park Avenue Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Buick Park Avenue Brake Pad Replacement is $194 with $54 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Buick Park AvenueV6-3.8L TurboService typeBrake Pads - Front ReplacementEstimate$347.12Shop/Dealer Price$391.72 - $515.80
2005 Buick Park AvenueV6-3.8LService typeBrake Pads - Rear ReplacementEstimate$350.91Shop/Dealer Price$393.57 - $516.20
1998 Buick Park AvenueV6-3.8L TurboService typeBrake Pads - Rear ReplacementEstimate$307.11Shop/Dealer Price$349.25 - $471.48
1999 Buick Park AvenueV6-3.8LService typeBrake Pads - Front ReplacementEstimate$350.91Shop/Dealer Price$393.60 - $516.25
1991 Buick Park AvenueV6-3.8L TurboService typeBrake Pads - Rear ReplacementEstimate$327.17Shop/Dealer Price$359.21 - $444.09
2005 Buick Park AvenueV6-3.8LService typeBrake Pads - Front ReplacementEstimate$350.91Shop/Dealer Price$393.78 - $516.57
2004 Buick Park AvenueV6-3.8L TurboService typeBrake Pads - Front ReplacementEstimate$350.91Shop/Dealer Price$393.62 - $516.29
2005 Buick Park AvenueV6-3.8L TurboService typeBrake Pads - Rear ReplacementEstimate$350.91Shop/Dealer Price$393.60 - $516.25
Show example Buick Park Avenue Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Shane

12 years of experience
68 reviews
Shane
12 years of experience
Park Avenue 1999 - Brake Pads - Austin, TX
Shane did a good job.

Carlos

10 years of experience
57 reviews
Carlos
10 years of experience
Park Avenue 1994 - Brake Pads - Lathrop, CA
Carlis told me ahead of time that he could be available earlier than 3 pm which worked great. He explained possible outcomes so no surprises. He completed job well within expected time Carlos is a great mechanic!

Michael

35 years of experience
28 reviews
Michael
35 years of experience
Park Avenue 1999 - Water Pump - San Antonio, TX
Michael went above and beyond fixing my vehicle. He was very knowledgeable and courteous. He took the time to figure out the situation on my vehicle. I highly recommend him, very Impressed with his service. I have never used a mobile mechanic service but definently will in the future.

Ruben

10 years of experience
136 reviews
Ruben
10 years of experience
Park Avenue 1991 - Shift Interlock Solenoid - Columbia, SC
Very professional and got the job done quickly. Had a great experience and paid a fair price

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Buick Park Avenue Brake Pad Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

P2139 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch D / F Voltage Correlation
P2139 P2139 code definition Throttle/Pedal Position Sensor/Switch D / F Voltage Correlation What the P2139 code means The P2139 code means that an improper voltage correlation between the throttle and pedal position sensors has caused the throttle plate to become...
How Much Does a Mechanic Make in Wisconsin?
Automotive technician jobs in Wisconsin have an average mechanic salary of $38k, which is higher than the national average.
The Best Used Cars to Buy If You're a Dog Trainer
If If you are a dog trainer, you expect a lot from your vehicle. You want a ride that is safe, roomy, and of course, dog friendly, since your training operation will often mean that you need to transport the...

Acceleration high-pitched whistling

This generation of Toyota Previas has a known issue with this that is typically related to something called a "flex pipe" which is a part of the exhaust system that sits in front of the catalytic converter. The fact that...

It says service engine soon usually in the morning while warming up and goes out but does not come back on.

The check engine light should come on when you turn the key to the "on" position, but without starting or running the car. That function allows you to do a bulb check but also indicates that the PCM (computer) is...

passenger side axle broke- how do I get the part out that connects into transmission

On the passenger side, be sure to remove the retaining bracket bolts. The splined segment of the axle that is within the transmission is retained in the transmission by a spring steel retaining clip known as a circlip. As you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com