Buick Century Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(345)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(345)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Buick Century Power Steering Pressure Hose Replacement is $184 with $44 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Buick CenturyV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$655.56Shop/Dealer Price$714.00 - $865.02
1999 Buick CenturyV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$692.79Shop/Dealer Price$762.00 - $957.24
1991 Buick CenturyL4-2.5LService typePower Steering Pressure Hose ReplacementEstimate$332.63Shop/Dealer Price$381.15 - $522.52
1995 Buick CenturyV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$489.88Shop/Dealer Price$529.21 - $637.18
1990 Buick CenturyL4-2.5LService typePower Steering Pressure Hose ReplacementEstimate$332.63Shop/Dealer Price$382.62 - $525.10
2000 Buick CenturyV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$757.19Shop/Dealer Price$842.99 - $1086.90
2002 Buick CenturyV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$757.19Shop/Dealer Price$842.62 - $1086.25
1996 Buick CenturyV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$489.88Shop/Dealer Price$529.21 - $637.18
Show example Buick Century Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(345)

Rating Summary
322
20
0
2
1
322
20
0
2
1

Tony

41 years of experience
67 reviews
Tony
41 years of experience
Buick Century V6-3.1L - Coolant is leaking - Stockton, California
He was great

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Buick Century V6-3.1L - Intake Manifold Gaskets - Chino Hills, California
Jay went above and beyond. He is truly a honest professional and darn good mechanic. I would recommend him to anyone. He is the best you can find anywhere.

Deuwn

21 years of experience
28 reviews
Deuwn
21 years of experience
Buick Century V6-3.1L - Battery - Capitol Heights, Maryland
Very good service

Brian

14 years of experience
96 reviews
Brian
14 years of experience
Buick Century V6-3.1L - Pre-purchase Car Inspection - Austin, Texas
Really great guy. I was considering selling my car or keeping it. He gave me some great insight into the condition of my car and the potential repairs needed over the next year which really helped me make a decision. Does a great job explaining things. Highly recommended.

Excellent Rating

(345)

Rating Summary
322
20
0
2
1
322
20
0
2
1
Number of Buick Century services completed
3795+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

P2314 OBD-II Trouble Code: Ignition Coil Secondary Number 5 Circuit Condition
P2314 means the secondary ignition burn time is either too short, incorrectly timed, or not present. This is usually due to a bad circuit issue.
How Does a Clutch Work in a Manual Transmission?
The The clutch in a car transmission is what works to engage and disengage the drive shaft’s moving parts. In a manual transmission, the driver has to manipulate a pedal or a lever in order to shift gears. The clutch...
How Long Does a Fog/Driving Light Bulb Last?
Fog Fog lights are a wonderful thing and are often underestimated. They can make driving in poor nighttime conditions much easier and safer thanks to the wide, flat beam of light they give off. They are located near the bottom...

How do I turn overdrive off?

You can turn the overdrive system off by pressing the O/D Off switch on the side of the shifter. When overdrive is turned off, you will have improved braking from the engine, but your top speed will be limited.

Need to know what to do with these codes generated

All the generated codes will need further inspection from a mechanic. The P0300, P0301, and P0305 are all misfires in the engine and could also cause some of the additional codes. You will need to have a diagnostics done and...

Cannot find fuel pressure regulator under the hood of my 2001 f150xl V6 4.2

The fuel pressure regulator is beneath the upper intake manifold. That manifold has to be removed to gain access. Once you remove the manifold, you will see the regulator connected to the fuel rail and one end of the regulator...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com