BMW M235i xDrive Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(122)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(122)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a BMW M235i xDrive Car Thermostat Replacement is $580 with $272 for parts and $308 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 BMW M235i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$1034.42Shop/Dealer Price$1227.58 - $1762.49
2015 BMW M235i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$864.56Shop/Dealer Price$1010.49 - $1425.59
Show example BMW M235i xDrive Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(122)

Rating Summary
119
1
0
0
2
119
1
0
0
2

Pierre

10 years of experience
366 reviews
Pierre
10 years of experience
BMW M235i xDrive L6-3.0L Turbo - Door Lock Actuator Replacement (Passenger Side Front) - Quincy, Massachusetts
Pierre is considerate, communicative and thorough.

Robert

23 years of experience
343 reviews
Robert
23 years of experience
BMW M235i xDrive L6-3.0L Turbo - Oil Change - Fort Worth, Texas
Did an awesome job

Joseph

25 years of experience
44 reviews
Joseph
25 years of experience
BMW 325i L6-2.5L - Thermostat - Litchfield Park, Arizona
Very pleased with the work and the price

Daniel

19 years of experience
64 reviews
Daniel
19 years of experience
BMW 325i L6-3.0L - Thermostat - Pittsburgh, Pennsylvania
He was very nice and knew what he was talking about.He was on time and did the job efficiently.Definitely will be returning to this company for mechanical needs.

Excellent Rating

(122)

Rating Summary
119
1
0
0
2
119
1
0
0
2
Number of BMW Car Thermostat Replacement services completed
1342+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Vacuum Leak?
A leak is the most common problem with the vacuum system. If the vacuum system in your vehicle is leaking, your vehicle...
How Long Does a Power Steering Pump Last?
In In a hydraulic power steering system, which is what the vast majority of cars on the road today use, fluid must be pumped through a series of lines and hoses to the steering rack. That is done by the...
How to Replace a Lost or Stolen Car Title in Minnesota
If If you are fortunate to own your vehicle, the proof you have of this is your car title. Perhaps you’ve been thinking about selling your car, maybe transferring the ownership to your teenaged child, or then again maybe you...

Heat/AC blower turns off and on

Hi there. Check the switch for any loose wires or shorts from the blower motor switch (https://www.yourmechanic.com/services/blower-motor-switch-replacement) to the ignition switch. Check the condition of the wire connections for an corrosion and see if the wires are loose on the...

When i drive over a dip in the road theres a vibration/grinding in the pedal and car.also when car leans right it does.

A possibility is the motor/transaxle mounts are worn or sagging and that causes misalignment of the CV axles accounting for the noise and vibration. However, that is just one possible scenario. Vibration under acceleration could also be due to an...

Hi, we just replaced head gaskets on my 2003 f150 4.6 triton, put it all back together and its seized up! Won't turn over or anyth

You should try to turn the crankshaft with a breaker bar and socket on the center crankshaft bolt. If it cannot be turned then you have the timing chain on wrong and may have bent the valves. Open up and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com