BMW ActiveHybrid 5 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a BMW ActiveHybrid 5 Car Battery Replacement is $390 with $250 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 BMW ActiveHybrid 5L6-3.0L Turbo HybridService typeCar Battery ReplacementEstimate$655.36Shop/Dealer Price$786.75 - $1166.75
2016 BMW ActiveHybrid 5L6-3.0L Turbo HybridService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$774.65 - $1152.33
2012 BMW ActiveHybrid 5L6-3.0L Turbo HybridService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$774.69 - $1152.40
2015 BMW ActiveHybrid 5L6-3.0L Turbo HybridService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$774.69 - $1152.40
2013 BMW ActiveHybrid 5L6-3.0L Turbo HybridService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$777.27 - $1156.91
Show example BMW ActiveHybrid 5 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
BMW ActiveHybrid 5 L6-3.0L Turbo Hybrid - Oil Change - Houston, Texas
Helpful and Courteous.

Andrew

27 years of experience
53 reviews
Andrew
27 years of experience
BMW ActiveHybrid 5 L6-3.0L Turbo Hybrid - Brake Pads Replacement (Front, Rear) - Las Vegas, Nevada
Andrew did a great job. Friendly and great to work with. Quickly took care of my service appointment. Would highly recommend.

Jeremy

21 years of experience
802 reviews
Jeremy
21 years of experience
BMW ActiveHybrid 5 L6-3.0L Turbo Hybrid - Valve Cover Gasket Replacement - Boynton Beach, Florida
The experience was actually awesome. Jeremy told me I scheduled a service I didn’t need and was super helpful and FAST! I’m not sure why I would ever schedule elsewhere

Nicholas

12 years of experience
303 reviews
Nicholas
12 years of experience
BMW ActiveHybrid 5 L6-3.0L Turbo Hybrid - Back To School Promo - Houston, Texas
He arrive before time and was very easy to communicate. Extremely professional and knowledgeable. If I had a choice of selecting a Mechanic next time I would pick him

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of BMW ActiveHybrid 5 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Replace a Secondary Air Injection Hose
A car's secondary air injection system allows oxygen into the exhaust. If a hose is faulty, a car may have increased emissions and performance issues.
How to Use a Battery Charger
Most Most people who have been around cars for a good chunk of their lives have experienced the hassle and inconvenience associated with a dead battery (https://www.yourmechanic.com/article/how-to-handle-dead-battery-problems). Sometimes it simply happens in the owner’s driveway, which is really the best...
P0608 OBD-II Trouble Code: Control Module VSS Output "A" Malfunction
P0608 means there is an malfunction in the vehicle speed sensor A control module often due too faulty speed sensor or shorted electrical wiring.

How do you silence the horn beep feature when using the remote?

Your car is set by default to honk the horn when you lock your doors with the remote. However, you can change this if you prefer. Here’s what you need to do: Press both the lock and unlock buttons on...

Realistic cost of owning a new 2016 AMG S63 vs. a S550 (both 4matic)

As you may know, there are very few things (if any) that either of these cars do not have (assuming we are NOT including the S63 Coupe in this comparison, which is a much more extreme version of the S...

Sometimes at very low speeds the brake pedal becomes hard and cannot be pressed.

It seems that your brake booster (https://www.yourmechanic.com/services/vacuum-booster-replacement) is not working well at low speeds. In this case, when the engine is not able to provide proper vacuum, the brake pedal gets hard. Try to press the brake pedal when the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com