BMW 750Li Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(150)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(150)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a BMW 750Li Power Steering Pressure Hose Replacement is $522 with $361 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 BMW 750LiV8-4.4L TurboService typePower Steering Pressure Hose ReplacementEstimate$2062.63Shop/Dealer Price$2471.46 - $3323.83
2012 BMW 750LiV8-4.4L Turbo HybridService typePower Steering Pressure Hose ReplacementEstimate$1872.63Shop/Dealer Price$2281.75 - $3134.34
2010 BMW 750LiV8-4.4L TurboService typePower Steering Pressure Hose ReplacementEstimate$1787.09Shop/Dealer Price$2174.80 - $2963.21
2011 BMW 750LiV8-4.4L Turbo HybridService typePower Steering Pressure Hose ReplacementEstimate$1787.09Shop/Dealer Price$2174.43 - $2962.56
2006 BMW 750LiV8-4.8LService typePower Steering Pressure Hose ReplacementEstimate$1070.72Shop/Dealer Price$1327.88 - $2032.20
2008 BMW 750LiV8-4.8LService typePower Steering Pressure Hose ReplacementEstimate$1070.72Shop/Dealer Price$1327.84 - $2032.12
2015 BMW 750LiV8-4.4L TurboService typePower Steering Pressure Hose ReplacementEstimate$2098.53Shop/Dealer Price$2549.96 - $3534.64
2007 BMW 750LiV8-4.8LService typePower Steering Pressure Hose ReplacementEstimate$1079.22Shop/Dealer Price$1337.04 - $2041.85
Show example BMW 750Li Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(150)

Rating Summary
140
3
1
1
5
140
3
1
1
5

Travis

20 years of experience
29 reviews
Travis
20 years of experience
750Li 2006 - Coolant Temperature Switch (Sensor) - Houston, TX
Great. Satisfactory work.

Michael

25 years of experience
138 reviews
Michael
25 years of experience
750Li 2007 - Oil Change - Indianapolis, IN
Great Mechanic it was a pleasure having him work on car.!! Very knowledgeable!!

Michael

25 years of experience
138 reviews
Michael
25 years of experience
750Li 2007 - Cooling/Radiator Fan Motor - Indianapolis, IN
Great Mechanic it was a pleasure having him work on car.!! Very knowledgeable!!

Michael

25 years of experience
138 reviews
Michael
25 years of experience
750Li 2007 - Alternator Belt - Indianapolis, IN
Great Mechanic it was a pleasure having him work on car.!! Very knowledgeable!!

Excellent Rating

(150)

Rating Summary
140
3
1
1
5
140
3
1
1
5
Number of BMW 750Li services completed
1650+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

P0079 OBD-II Trouble Code: Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0079 code definition Exhaust Valve Control Solenoid Circuit Low (Bank 1) What the P0079 code means P0079 indicates an issue that is...
P0306 OBD-II Trouble Code: Cylinder 6 Misfire Detected
P0306 code definition Cylinder 6 Misfire Detected What the P0306 code means P0306 is an OBD-II generic code that the engine control...
How to Replace an AC Condenser
The AC condenser malfunctions if the air conditioning system has clogged passages or leaks, or if the condenser electric fans stop working.

I have white smoke coming out of exhaust and engine running rough.

Hi There, It sounds like you may have a failing cylinder head gasket allowing coolant to leak from the water passages into the cylinders resulting in the coolant being burnt in the combustion chamber with the fuel. If this is...

When backing up the steering wheel seems to lock and there is like a squeaking noise,but when the car is warmed up it seems fine

This suggests your power steering pump may be failing or you have a leak elsewhere in one of the power steering lines. The power steering (https://www.yourmechanic.com/services/power-steering-fluid-is-leaking-inspection) system operates on very high pressurized hydraulic pressure (in some cases as much as...

When replacing driveshaft , do I also have to replace the cv axle ? And do I need to replace the Ball joint ?

The driveshafts (aka, "axles") on your vehicle are CV type axles. If a CV axle were replaced (there is one on each side of the car), it is replaced as a unit with both inboard and outboard CV joints already...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com