BMW 440i xDrive Gran Coupe Car idle is rough Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(18)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(18)

Car idle is rough Inspection Service

How much does a Car idle is rough Inspection cost?

On average, the cost for a BMW 440i xDrive Gran Coupe Car idle is rough Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 BMW 440i xDrive Gran CoupeL6-3.0L TurboService typeCar idle is rough InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2020 BMW 440i xDrive Gran CoupeL6-3.0L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 BMW 440i xDrive Gran CoupeL6-3.0L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 BMW 440i xDrive Gran CoupeL6-3.0L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example BMW 440i xDrive Gran Coupe Car idle is rough Inspection prices

A rough idling engine can be caused by a number of issues, some of them are serious while others tend to be minor, but the symptoms remain pretty much the same. The car will feel rough and bouncy when the engine is running. The car will also idle below its regular speed, display inconsistent RPMs and may produce a shaking, skipping or slipping sound when the vehicle is running.

While a rough idling engine may seem to be a simple inconvenience it often indicates a deeper problem within the engine. The vehicle should be inspected and repaired as soon as possible because small problems have a way of turning into expensive repairs.

How this system works:

The idle speed of an engine is basically the rotational speed the engine runs on when it is un-coupled from the drivetrain and the throttle pedal is not being depressed. The idle speed is measured in the revolutions per minute of the crankshaft.

When an engine is running at idle speed it generates enough power to smoothly operate equipment such as the water pump, alternator, and power steering but not enough power to move the vehicle itself. A passenger car will usually idle between 600 RPMs and 1000 RPMs. A properly functioning idle should run smoothly without skipping or slipping.

Common reasons for this to happen:

  • Dirty Fuel Injectors: The fuel injection system injects fuel into the cylinders, which creates a mix of air, and fuel to ignite and burn. Fuel injectors have tiny nozzles to spray the fuel into the cylinder and they can become clogged over time.

A clogged or failing fuel injector creates a lack of fuel in the vehicle's engine. This can cause a rough idle, it can also cause symptoms such as slow acceleration or the car not feeling as if it has enough power. If the problem is addressed early, it is possible to clean the injectors, which will restore them to full function. If this condition is not addressed in a timely manner the injectors will need to be replaced.

  • Incorrect Idle Speed: While the average idle speed falls between 600 to 1,000 RPMs, if your vehicle is experiencing a rough idle it could be due to an incorrect idle speed setting. A trained mechanic can easily adjust the idle speed, and it should stay at the proper speed. If an adjusted idle speed becomes inconsistent or changes at random intervals there may be a bigger problem that needs to be explored.

  • Vacuum Leak: If the vacuum system has a leak, it can seriously affect the ability of the vehicle’s computer to regulate the air to fuel ratio. This can lead to a rough idle and if the problem is not addressed the car may experience slow acceleration and a lack of power. Vacuum leaks should be inspected and repaired immediately.

  • Incorrectly Installed or Damaged Plugs: Spark plugs are responsible for creating the spark that allows the vehicle to burn fuel. If spark plugs are improperly installed or malfunctioning, the idle speed can be affected. The vehicle's engine may vibrate or there may be slipping or straining sounds coming from the engine.

  • Defective or Clogged Fuel Pump: A rough idle can be related to fuel delivery issues. The fuel pump, which is responsible for pulling fuel from the gas tank to the fuel injectors, can become clogged or defective. If this happens the engine will not get enough fuel, which can cause a rough idle, sputtering, stalling and even slow acceleration.

  • Clogged Fuel Filter: A clogged fuel filter can cause similar problems. The job of the fuel filter is to screen out contaminants in the fuel, over time it will become clogged and need to be replaced. A rough idle is one symptom of a clogged fuel filter.

  • Failing Electrical Components: A problem or failure in the ignition system or various electronic components can cause a rough idle. If this is the case, the problem will usually get worse as RPMs increase. Common culprits include the ignition control module, plug wires, coils, and spark plugs.

  • Defective Airflow Sensor: A defective airflow sensor can be responsible for a rough idle. A mass airflow sensor detects the amount of air coming into the fuel injection system and sends that information to the vehicle's computer. The computer uses that data to deliver the proper amount of fuel to the air in the vehicle. Over time these sensors can malfunction or become dirty. One of the first symptoms of a malfunctioning airflow sensor is a rough idle. The car may also accelerate slowly and even stutter or stall as the problem progresses.

  • Dirty Oxygen Sensor: Oxygen sensors measure how rich or lean the gases are as they exit the combustion chamber. Depending on the results, the amount of fuel entering the engine is adjusted by the vehicle computer. The ultimate goal is to maintain an ideal mixture that produces the lowest emissions. A dirty or failing oxygen sensor will usually trigger the check engine light and can lead to a rough idle, lower fuel efficiency and failed emission test.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the rough idle issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car for leaks and defective parts. This includes airflow sensors, fuel pump, electronics and other important components related to your car's idling state. It may be necessary to crank the car and test drive it in order to verify the problem and provide an accurate diagnosis.

How important is this service?

A rough idling car is more of an inconvenience at first but if the problem is not solved it can quickly lead to bigger problems such as slow acceleration, stalling and eventually a vehicle that will not start at all. Most of these conditions can make the vehicle dangerous to drive. A rough idle should be inspected and repaired as quickly as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1

Juan

9 years of experience
309 reviews
Juan
9 years of experience
BMW 440i xDrive Gran Coupe L6-3.0L Turbo - Pre-purchase Car Inspection - Durham, North Carolina
He was very friendly and did super thorough inspection of my new car.

Casey

24 years of experience
152 reviews
Casey
24 years of experience
BMW 318is L4-1.8L - Car idle is rough - Snohomish, Washington
Great guy! Good communication and very courteous. Diagnosed and repaired my idle issues in a short timeframe. I can't remember when my car has run this good!

Steve

40 years of experience
105 reviews
Steve
40 years of experience
BMW 528i L6-2.8L - Car idle is rough - Lake Worth, Florida
Steve was very nice and professional and knowledgeable about my car, he even offered me a ride to work when he was unable to diagnose the problem, he took pride in his job which is very rare now a days, telling me that he has to come back when he has more tools for the diagnosis

Patrick

33 years of experience
1412 reviews
Patrick
33 years of experience
BMW X5 L6-3.0L - Car idle is rough - Pflugerville, Texas
Awesome

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1
Number of BMW Car idle is rough Inspection services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

P0222 OBD-II Trouble Code: Throttle/Pedal Position Switch/Sensor B Circuit Low Input
P0222 code definition Throttle/Pedal Position Switch/Sensor B Circuit Low Input What the P0222 code means The manufacturer specifies a range of acceptable...
How to Program the Key Fob for Your Honda or Acura
Over Over time, it has become a convenience for us to have remote controls for different functions of our vehicles. Remote keyless entry is the most common, but many vehicles also have remote engine starting. We have become so accustomed...
How to Be Careful When Buying a Car
When When you buy a car, whether it is a new car from the dealership, a used vehicle (https://www.yourmechanic.com/article/how-to-buy-a-used-car) from a car lot or dealer, or a used car as a private sale, you need to come to an agreement...

How do I remove and replace air filters in the climate controlled seats?

If your truck is equipped with climate controlled seats, they include air filters under each seat. These air filters need to be removed and replaced from time to time. To remove and replace the air filters. Get to the air...

EGR warning

Hello. An EGR valve that is intermittently failing will cause the Check Engine Light to turn off and on. If the code is for the EGR valve and the voltages to the valve are correct, then the EGR valve may...

Coolant temperature gauge does not move at all. 1998 Ford Ranger

Hi there - most likely the coolant temperature sensor (https://www.yourmechanic.com/article/how-to-replace-a-cylinder-head-coolant-temperature-sensor-by-steve-kaleff) (for the gauge, not the coolant sensor that drives the fuel injection - there are usually two) is toast. This can be checked with an ohm meter. A reading of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com