BMW 335i xDrive Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(29)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(29)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a BMW 335i xDrive Car Thermostat Replacement is $559 with $265 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 BMW 335i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$855.06Shop/Dealer Price$1000.68 - $1407.77
2015 BMW 335i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$945.64Shop/Dealer Price$1112.14 - $1596.49
2014 BMW 335i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$945.64Shop/Dealer Price$1112.24 - $1596.66
2013 BMW 335i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$1142.52Shop/Dealer Price$1358.33 - $1990.41
2011 BMW 335i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$1142.52Shop/Dealer Price$1363.75 - $1999.88
2012 BMW 335i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$1142.52Shop/Dealer Price$1358.85 - $1991.31
2009 BMW 335i xDriveL6-3.0L TurboService typeCar Thermostat ReplacementEstimate$836.14Shop/Dealer Price$975.41 - $1377.75
Show example BMW 335i xDrive Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(29)

Rating Summary
27
2
0
0
0
27
2
0
0
0

Jose

21 years of experience
36 reviews
Jose
21 years of experience
BMW 335i xDrive L6-3.0L Turbo - Crankshaft Position Sensor - Fort Lauderdale, Florida
Went above and beyond to fix the issue with my car.

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
BMW 335i xDrive L6-3.0L Turbo - Oil Change - Las Vegas, Nevada
Great honest technician who came on time and ready to make my day easier. he was in great spirits and helped educate me what I needed done in the future. would book him again for next service!

Tien

24 years of experience
903 reviews
Tien
24 years of experience
BMW 335i xDrive L6-3.0L Turbo - UberX Inspection - San Ramon, California
Great service. Was early and got the work done promptly. Will seriously use this service again and refer people. Thank you

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
BMW 335i xDrive L6-3.0L Turbo - Tail Light Lens Replacement (Driver Side) - Redmond, Washington
He's great. Fixed something the dealer wanted waaaay more to do.

Excellent Rating

(29)

Rating Summary
27
2
0
0
0
27
2
0
0
0
Number of BMW 335i xDrive services completed
319+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P0093 OBD-II Trouble Code: Fuel System Leak Detected Large Leak
P0093 code definition Fuel System Leak Detected Large Leak What the P0093 Code Means A code exists for a large leak, small leak,...
How Long Do Suspension Springs Last?
Most cars today have shocks in the rear and spring/strut assemblies in the front. Both struts and shocks work very similarly, and the...
B1203 OBD-II Trouble Code: Fuel Sender Circuit Short To Battery
B1203 means a circuit in the fuel tank sender has shorted. This is likely caused by a faulty wire, or the fuel tank sender could be defective.

steady ticking sound from ac compressor

Hey there. The one in the video has a major problem with the pulley bearing getting ready to seize up. You can hear the noise when the A/C compressor turns off. These bearings will start to spin on the front...

I have a 2002 ford taurus SE 3.0 brakes went out but reservoir is full no leaks around tires so which mc do i replace the reservoi

If you had where the brake pedal went to the floor on you and there is no loss of brake fluid then this would only be caused by the brake master cylinder internal leakage. You will need to have the...

Had valve job done on my 2010 Nissan Titan and head gasket and valve cover gasket replaced, truck still puffs could of smoke

If you have not already done so, replace the PCV valve. You should have the engine compression tested to see if any one cylinder is low on compression. The cause of white smoke that is not just condensation in the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com