BMW 330xi Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(46)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(46)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a BMW 330xi Intake Manifold Gaskets Replacement is $510 with $174 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 BMW 330xiL6-3.0LService typeIntake Manifold Gaskets ReplacementEstimate$1028.98Shop/Dealer Price$1162.92 - $1510.86
2004 BMW 330xiL6-3.0LService typeIntake Manifold Gaskets ReplacementEstimate$994.74Shop/Dealer Price$1116.93 - $1456.06
2006 BMW 330xiL6-3.0LService typeIntake Manifold Gaskets ReplacementEstimate$699.36Shop/Dealer Price$794.41 - $1062.00
2001 BMW 330xiL6-3.0LService typeIntake Manifold Gaskets ReplacementEstimate$924.34Shop/Dealer Price$1029.09 - $1315.54
2002 BMW 330xiL6-3.0LService typeIntake Manifold Gaskets ReplacementEstimate$924.34Shop/Dealer Price$1038.89 - $1332.69
2003 BMW 330xiL6-3.0LService typeIntake Manifold Gaskets ReplacementEstimate$924.34Shop/Dealer Price$1030.03 - $1317.18
Show example BMW 330xi Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(46)

Rating Summary
41
2
2
0
1
41
2
2
0
1

Alex

24 years of experience
464 reviews
Alex
24 years of experience
BMW 330xi L6-3.0L - Inspection / Diagnostics - Plano, Texas
Was able to determine where previous tech did not complete service correctly.

Ernest

21 years of experience
9 reviews
Ernest
21 years of experience
BMW 330xi L6-3.0L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Plano, Texas
Excellent. He was on time, very knowledgeable and fixed it right the first time. Where have you guys been!!!! So glad to have found your service!

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
BMW 330xi L6-3.0L - Oil Change - Beaverton, Oregon
Andrew was punctual, thorough and professional.

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
BMW 330xi L6-3.0L - Heater Blower Motor Resistor - Beaverton, Oregon
Andrew did a great job.

Excellent Rating

(46)

Rating Summary
41
2
2
0
1
41
2
2
0
1
Number of BMW 330xi services completed
506+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

Great-paying Auto Mechanic Jobs Near You
Looking for an auto mechanic job? Find a ton of great paying jobs for auto technicians near where you live.
4 Essential Things to Know About Jumper Cables
You You may think that all jumper cables are the same, but nothing could be further from the truth! Finding those jumper cables in the bargain bin may seem like a great idea at the time, but the shock that...
How to Troubleshoot a Car With Clutch Noise
Clutch systems create noise if there is a damaged clutch master cylinder, clutch pedal, pressure plate, clutch disc, flywheel, or pilot bearing.

Engine Hot A/C turned off message

Overheating can occur if the radiator is partially clogged or if there is a fault with the water pump and/or drive belt. There are other causes of overheating as well. If you schedule an engine overheating diagnostic (https://www.yourmechanic.com/services/car-is-overheating-inspection) with a...

Heater does not blow hot air.

Hi there. Check the coolant level in the radiator and make sure that its full. Check the heater core valve near the firewall in the engine compartment and see if valve is working. Feel the heater hoses before the valve...

won't start in damp weather

This problem of hard or no start during damp weather is most commonly caused by ignition wires or engine running too lean. Try to spray the plug wires with water from a spray bottle to see if the wires start...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com