BMW 325xi Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(83)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(83)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a BMW 325xi Power Steering Pressure Hose Replacement is $574 with $392 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 BMW 325xiL6-2.5LService typePower Steering Pressure Hose ReplacementEstimate$985.08Shop/Dealer Price$1189.17 - $1782.99
2003 BMW 325xiL6-2.5LService typePower Steering Pressure Hose ReplacementEstimate$973.37Shop/Dealer Price$1173.43 - $1764.25
2006 BMW 325xiL6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$1512.84Shop/Dealer Price$1817.91 - $2717.02
2004 BMW 325xiL6-2.5LService typePower Steering Pressure Hose ReplacementEstimate$973.37Shop/Dealer Price$1173.49 - $1764.34
2001 BMW 325xiL6-2.5LService typePower Steering Pressure Hose ReplacementEstimate$973.37Shop/Dealer Price$1176.84 - $1770.21
2005 BMW 325xiL6-2.5LService typePower Steering Pressure Hose ReplacementEstimate$973.37Shop/Dealer Price$1173.81 - $1764.90
Show example BMW 325xi Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(83)

Rating Summary
74
4
1
0
4
74
4
1
0
4

Ryan

17 years of experience
21 reviews
Ryan
17 years of experience
BMW 325xi L6-2.5L - Brakes, Steering and Suspension Inspection - Morristown, New Jersey
Knowledgeable curtious. Very happy with service

Travis

16 years of experience
165 reviews
Travis
16 years of experience
BMW 325xi L6-2.5L - Coolant is leaking - Wylie, Texas
Very good at what he does

Mark

15 years of experience
73 reviews
Mark
15 years of experience
BMW 325xi L6-2.5L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Carmel, Indiana
Very professional and friendly! I would definitely recommend Mark!

Eugenio

27 years of experience
133 reviews
Eugenio
27 years of experience
BMW 325xi L6-2.5L - Pre-purchase Car Inspection - Arlington, Virginia
He did an excellent job with my pre-purchase inspection and saved me a lot of money, identifying problems that I would not have been able to catch. The convenience of being able to send a mechanic straight to the dealership was huge! Would definitely recommend both Eugenio and this site to anyone!

Excellent Rating

(83)

Rating Summary
74
4
1
0
4
74
4
1
0
4
Number of BMW 325xi services completed
913+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P0062 OBD-II Trouble Code: HO2S Heater Control Circuit (Bank 2 Sensor 3)
P0062 P0062 trouble code definition Trouble code P0062 indicates that the heater circuit used to warm up an oxygen sensor has malfunctioned. A voltage ranging from 12.0-13.5 and a ground connection is required to operate the oxygen sensor. The cause...
A Buyer's Guide to the 2012 Honda Crosstour
There There could be a number of reasons an SUV isn’t right for you: the price, the size, their mpg, etc. However, there could also be a number of reasons you’d really like to have some extra space. If that’s...
Driving With ABS in Snow and Ice
The anti-lock braking system, referred to as ABS, does not work as effectively in snow, but does retain mild effectiveness on icy roads.

Wheel making noise

Bearing failure is common. Hub Bearings tend to make humming type noises as they start to fail. The noise usually gets louder or quieter during turning. This is because more or less stress is put on the bearing. In extreme...

Check engine light is on with code P0440. Also the car makes noise

Hi there, thanks for writing in. This code (https://www.yourmechanic.com/article/p0440-obd-ii-trouble-code-evaporative-emission-control-system-malfunction-by-jay-safford_2) is for a leak or failure in the evap emissions system. By far the most common cause of this is a bad gas cap (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-gas-cap). If the seal on the cap...

I just did a tune up and now my truck shakes when speeding up from about 1500 to 2000 rpm. Smooths out when pressing gas harder. [Engine](/topics-engine-ford/) sounds better and stronger than before tune up also noticing more tranny slip between gears.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com