BMW 320i Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(65)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(65)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a BMW 320i Front Crankshaft Seal Replacement is $650 with $20 for parts and $630 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
Show example BMW 320i Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(65)

Rating Summary
60
2
1
1
1
60
2
1
1
1

Andrian

33 years of experience
185 reviews
Andrian
33 years of experience
BMW 320i L4-2.0L Turbo - Oil Change - Pompano Beach, Florida
Excelent very punctual , professional

Michael

22 years of experience
391 reviews
Michael
22 years of experience
BMW 320i L4-2.0L Turbo - Smoke from engine or exhaust Inspection - Norco, California
Honest, friendly, and took time to explain the problem

Collins

13 years of experience
678 reviews
Collins
13 years of experience
BMW 320i L4-2.0L Turbo - Serpentine/Drive Belt - Atlanta, Georgia
Collins was very professional. We are pleased with the quick and convenient service. We definitely will use again in the future.

Justin

9 years of experience
372 reviews
Justin
9 years of experience
BMW 320i L4-2.0L Turbo - 50 Point Inspection - Deerfield Beach, Florida
Justin, always thoroughly explains the work that was done & even recommends what needs to be in an x amount of time. He’s polite, courteous & professional

Excellent Rating

(65)

Rating Summary
60
2
1
1
1
60
2
1
1
1
Number of BMW 320i services completed
715+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P2338 OBD-II Trouble Code: Cylinder #3 Above Knock Threshold
P2338 P2338 Code Definition A P2338 code is a generic powertrain code related to an ignition-related problem, such as an engine misfire. It appears when the engine control module (ECM) has received a voltage reading outside the allowed variances from...
Symptoms of Bad or Failing Timing Gears (Gear To Gear)
Common signs include rattling noises from the engine, a rough running or backfiring engine, and an engine that does not run.
How to Know If Your Car Has Been Recalled
Car recalls happen when parts fail and the manufacturers replace them. If your car is recalled the manufacturer will contact you with instructions.

Fan wont blow out top vents for defrost.

Hi there. Check the blend doors to the vents and see if they move when the switch is turned. If they do not move, then check for a vacuum hose to the blend door actuator. If there is no vacuum...

Which transmission? 2012 Chevrolet Cruze

Hi there - GM delivered the Cruze with several models of automatic transmission. The 6T40 6-speed transmission, for example, was used with both the 1.4l turbo and 1.8l engines. Several other transmission were used uniquely with each engine size. As...

Power steering is failing

Hello, thank you for writing in. There are several components you will want to check. First, make sure your power steering fluid is full. If it is low, then there is a leak in the system that will need to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com