BMW 228i xDrive Windshield Washer Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Windshield Washer Pump Replacement Service

How much does a Windshield Washer Pump Replacement cost?

On average, the cost for a BMW 228i xDrive Windshield Washer Pump Replacement is $111 with $16 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 BMW 228i xDriveL4-2.0L TurboService typeWindshield Washer Pump - Front ReplacementEstimate$146.25Shop/Dealer Price$171.57 - $208.14
2015 BMW 228i xDriveL4-2.0L TurboService typeWindshield Washer Pump - Rear ReplacementEstimate$126.25Shop/Dealer Price$151.60 - $188.19
2016 BMW 228i xDriveL4-2.0L TurboService typeWindshield Washer Pump - Rear ReplacementEstimate$126.25Shop/Dealer Price$151.60 - $188.19
2016 BMW 228i xDriveL4-2.0L TurboService typeWindshield Washer Pump - Front ReplacementEstimate$126.25Shop/Dealer Price$151.56 - $188.12
Show example BMW 228i xDrive Windshield Washer Pump Replacement prices

What is the Windshield Washer Pump all about?

The windshield washer pump is a small electric water pump. When the washer pump is activated, it takes the washer fluid from the windshield washer reservoir and directs it to be sprayed through the washer jets onto the windshield. It is an electrical component that can fail over time. If you don't see any fluid coming out of the washer jets when you activate the windshield wiper switch, ask the mechanic to check the tubes for cracks and the nozzles for clogging.

Keep in mind:

Whenever the windshield washer pump is repaired or replaced, the entire windshield washing system should be inspected. It’s possible that the nozzles or the wiper switch are actually the cause of the problem.

How it's done:

  • Test operation of the wiper switch.
  • Make sure the nozzles are not clogged.
  • Test for power and ground at the washer pump.
  • Remove and replace the washer pump.
  • Test for proper operation of the washer system.

Our recommendation:

The windshield washing and wiping system is usually not inspected during routine maintenance. However, anytime a part of the windshield washing and wiping system is replaced or repaired, the windshield washer pump should be checked. If you notice that your vehicle is having a hard time spraying wiper fluid onto your windshield, you should schedule an inspection.

What common symptoms indicate you may need to replace the Windshield Washer Pump?

When the washer pump is activated, washer fluid doesn't spray on windshield.

How important is this service?

Your windshield washing system is designed to keep your windshield clean and your visibility high. When you pull the windshield washer switch on the steering column, the windshield washer pump is activated. The windshield washer pump is an electric water pump that pulls washer fluid from the windshield washer reservoir, and sends it to the washer jets, where it is sprayed onto the windshield through nozzles. This washer fluid acts as soap, and the windshield wiper blades then wipe it off. This process cleans your windshield of any dirt and debris that has accumulated on it.

When the windshield washer pump malfunctions, washer fluid will not be sent to the washer jets, and your vehicle will not be able to spray washer fluid onto the windshield. As a result, your visibility will decrease.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0

Jimmi

27 years of experience
261 reviews
Jimmi
27 years of experience
BMW 228i xDrive L4-2.0L Turbo - Brake Rotor/Disc Replacement (Rear) - Sanford, Florida
I will only work with Jimmi. Honest mechanic and quality work.

Behrak

9 years of experience
336 reviews
Behrak
9 years of experience
BMW 228i xDrive L4-2.0L Turbo - Oil Change - Duluth, Georgia
Great first experience - will definitely use again!

Damian

11 years of experience
465 reviews
Damian
11 years of experience
BMW 228i xDrive L4-2.0L Turbo - Oil Change - Kensington, Maryland
Damian showed up early to my appointment. He was courteous and friendly.

Craig

16 years of experience
67 reviews
Craig
16 years of experience
BMW 530i L6-3.0L - Windshield Washer Pump Replacement (Front) - San Jose, California
Craig is a very nice guy and his service is super!

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0
Number of BMW Windshield Washer Pump Replacement services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Vacuum a Car
Keeping Keeping your car clean (https://www.yourmechanic.com/article/the-top-10-car-cleaning-products-interior-exterior) on the outside as well as on the inside (https://www.yourmechanic.com/article/4-essential-things-to-know-about-cleaning-the-interior-of-your-car) is part of regular vehicle maintenance. While keeping the exterior of your car clean is mainly for appearance and corrosion resistance, cleaning your car’s...
How to Change a Sway Bar Link
Sway bar links connect the sway bar to the suspension and chassis. Though sway bar links vary in design, the steps for replacing them are similar.
P0753 OBD-II Trouble Code: Shift Solenoid A Electrical/1-2 Shift Solenoid Circuit Electrical
P0753 code means that the PCM has detected an electrical abnormality within the transmission shift solenoid A often due too an faulty shift solenoid.

Battery drainage

This sounds like potentially a short somewhere in your electrical system perhaps with an accessory or some component that is draining the battery while the car is not running. I would start testing accessories like electrical outlets, etc. to see...

Car wont start

Hello, thank you for writing in. The vehicle may be having a programming issue. The security system may be locking you out as a result. You need a high-tech scan tool to properly pull enough information from the vehicle to...

Hi my car jerks while accelerating and cruising but most of the things that I’ve seen mentioned for the problem has been fixed already. Also my check engine light doesn’t come on to say the problem. My car is at 199,500 miles it’s a 2006 Nissan Sentra

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com