Audi V8 Quattro Car Battery Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Audi V8 Quattro Car Battery Replacement is $285 with $145 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1990 Audi V8 QuattroV8-3.6L	Service typeCar Battery Replacement	Estimate$445.60	Shop/Dealer Price$524.55 - $747.23
1991 Audi V8 QuattroV8-3.6L	Service typeCar Battery Replacement	Estimate$564.49	Shop/Dealer Price$672.32 - $988.61
1992 Audi V8 QuattroV8-4.2L	Service typeCar Battery Replacement	Estimate$564.49	Shop/Dealer Price$672.37 - $988.68
1994 Audi V8 QuattroV8-4.2L	Service typeCar Battery Replacement	Estimate$564.49	Shop/Dealer Price$672.37 - $988.68
1993 Audi V8 QuattroV8-4.2L	Service typeCar Battery Replacement	Estimate$564.49	Shop/Dealer Price$674.94 - $993.19

Show example Audi V8 Quattro Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(173)

Rating Summary

162

5

3

1

2

162

5

3

1

2

SEE REVIEWS NEAR ME

Mila

12 years of experience

129 reviews

Mila

12 years of experience

by Home

Audi S4 V6-2.7L Turbo - Car Battery Replacement - Centreville, Virginia

Mila did a very good job. The only reason I didn’t give 5 stars is, he was not 100% familiar with how to remove or reinstall the trim parts under the hood that you have to do to replace the battery on this particular car (2002 Audi S4}, it’s not easy. I knew that very few Mechanics have experience with this particular car so I hung out and helped him get it right. He was more than willing to make sure it was perfect before he left, and he did. 4.5 stars is probably the right rating

Jason

16 years of experience

344 reviews

Jason

16 years of experience

by Alex

Audi A4 Quattro L4-2.0L Turbo - Battery - Brooklyn, New York

Fantastic service, thank you.

Breck

21 years of experience

681 reviews

Breck

21 years of experience

by Leigh

Audi A4 Quattro L4-2.0L Turbo - Car Battery Replacement - Houston, Texas

Early and efficient

AUDIE

34 years of experience

191 reviews

AUDIE

34 years of experience

by Tekequa

Audi A5 Quattro L4-2.0L Turbo - Battery - Las Vegas, Nevada

Great! On time, knowledgeable and got the job done. Thank you!

Excellent Rating

(173)

Rating Summary

162

5

3

1

2

162

5

3

1

2

SEE REVIEWS NEAR ME

Recent articles & questions

What To Do If Your Car Is Skidding

Driving Driving on wet or icy roads can easily lead to dangerous situations when you're behind the wheel. One of the most common of these situations is skidding. While this can be scary to deal with on its own, understanding...

P2082 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 1

What What the P2082 code means? The P2082 code means that the exhaust gas temperature (EGT) sensor has been found to have out of range sensor readings. When these out of range sensor readings are found with the bank 2...

P0536 OBD-II Trouble Code: A/C Evaporator Temperature Sensor Circuit Range/Performance

P0536 means an issue with the A/C temperature sensor circuit, often caused by damaged electrical components, or low refrigerant levels.

Car alarm short

I’ll assume that you are speaking of an aftermarket alarm. There is a huge selection of alarms on the market and they all have different features for making the car more secure. Most have a starter interrupt relay. The start...

where is the oil filter located on this engine?

You will find it on the passenger side rear of the engine. It's a little tough to get to unless on a vehicle lift.

Driver door won't Open from the inside and outside

Claimed by John Hege

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com