Audi S7 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(5)

Brake Pad Replacement Estimate for Audi S7

Audi S7 Brake Pad Replacement costs $247 on average.

CarServiceEstimateShop/Dealer Price
2013 Audi S7V8-4.0L TurboService typeBrake Pads - Rear ReplacementEstimate$367.07Shop/Dealer Price$471.34 - $705.41
2017 Audi S7V8-4.0L TurboService typeBrake Pads - Front ReplacementEstimate$452.45Shop/Dealer Price$557.98 - $846.64
2014 Audi S7V8-4.0L TurboService typeBrake Pads - Rear ReplacementEstimate$357.07Shop/Dealer Price$457.38 - $688.48
2018 Audi S7V8-4.0L TurboService typeBrake Pads - Rear ReplacementEstimate$278.51Shop/Dealer Price$339.01 - $487.06
2014 Audi S7V8-4.0L TurboService typeBrake Pads - Front ReplacementEstimate$549.39Shop/Dealer Price$697.82 - $1073.19
2015 Audi S7V8-4.0L TurboService typeBrake Pads - Rear ReplacementEstimate$262.51Shop/Dealer Price$339.18 - $499.36
2016 Audi S7V8-4.0L TurboService typeBrake Pads - Rear ReplacementEstimate$350.17Shop/Dealer Price$447.17 - $669.08
2015 Audi S7V8-4.0L TurboService typeBrake Pads - Front ReplacementEstimate$457.45Shop/Dealer Price$582.20 - $885.27
Show example Audi S7 Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

AL

12 years of experience
227 reviews
AL
12 years of experience
Audi S7 V8-4.0L Turbo - Spark Plugs - Denver, Colorado
Al was extremely friendly and knows exactly what he is doing. Gave me a few pointers to keep an eye on to keep the car running healthy Thank you again!

Engel

23 years of experience
5 reviews
Engel
23 years of experience
Audi S7 V8-4.0L Turbo - Pre-purchase Car Inspection - Arlington, Virginia
Fully explained what he saw of the car in PPI and made me feel confident in the health of the vehicle. Responded in timely manner when I messaged him. Great experience all around.

Christopher

10 years of experience
100 reviews
Christopher
10 years of experience
Audi S7 V8-4.0L Turbo - Brake Rotor/Disc Replacement (Front) - Katy, Texas
Friendly and timely.

Leslie

14 years of experience
81 reviews
Leslie
14 years of experience
Audi S7 V8-4.0L Turbo - Pre-purchase Car Inspection - Newtown Square, Pennsylvania
Leslie did a pre-purchase car inspection for me and I was very happy with his communication and the report. He arrived early and promptly called me once the inspection was done to let me know the results.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Audi S7 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Replace a High Pressure Safety Valve
High pressure safety valves help the car engine run smoothly. Oil filter housings can burst if high pressure relief valves are stuck closed.
How to Use the OnStar RemoteLink App on Your Smart Phone
OnStar is a driver-assist tool built into many GM vehicles. The OnStar RemoteLink app for smart phones allows drivers to find places or unlock doors.
Essential Things to Know About the Toyota Prius Hybrid Car
The Toyota Prius first came out in 1997. The current Prius gets 58 miles per gallon and can travel a mile without any gas when it's in EV mode.

I want to buy a 2006 Mazda 6 with 141,000 miles on it. Is this a good car?

Hi Ashdin. Thanks for contacting us today. The Mazda 6 is a hit or miss type of vehicle in regards to reliability. Some of them have no mechanical issues, while others develop transmission problems after about 10 years. However, the...

Where can i find Crankshaft position location on my 2009 Acura TSX

The sensor is mounted to the engine block with a single bolt, mid way along the engine block under the exhaust manifold. The sensor is concealed beneath a cover that must be removed to gain access. You will see a...

What are other expected problems when the timing belt goes out on a 2003 325i bmw. Other things to look for or replace when that h

Hi Renee. When the timing belt breaks, it can create damage inside the motor, such as with cylinder head components. If the pulley's and the belt are replaced, and the engine starts without a constant ticking noise, then you should...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com