Audi S5 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(59)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(59)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Audi S5 Fuel Injector Replacement is $1290 with $1129 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Audi S5V6-3.0L TurboService typeFuel Injector ReplacementEstimate$3026.76Shop/Dealer Price$3777.09 - $5932.43
2015 Audi S5V6-3.0L TurboService typeFuel Injector ReplacementEstimate$3623.76Shop/Dealer Price$4531.91 - $7160.56
2011 Audi S5V6-3.0L TurboService typeFuel Injector ReplacementEstimate$2992.76Shop/Dealer Price$3743.16 - $5898.55
2010 Audi S5V8-4.2LService typeFuel Injector ReplacementEstimate$2428.52Shop/Dealer Price$3037.89 - $4764.77
2016 Audi S5V6-3.0L TurboService typeFuel Injector ReplacementEstimate$2885.16Shop/Dealer Price$3608.73 - $5683.47
2017 Audi S5V6-3.0L TurboService typeFuel Injector ReplacementEstimate$2885.16Shop/Dealer Price$3583.11 - $5638.65
2012 Audi S5V6-3.0L TurboService typeFuel Injector ReplacementEstimate$3739.86Shop/Dealer Price$4674.33 - $7383.24
2012 Audi S5V8-4.2LService typeFuel Injector ReplacementEstimate$2837.48Shop/Dealer Price$3550.56 - $5355.23
Show example Audi S5 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(59)

Rating Summary
55
3
0
0
1
55
3
0
0
1

Charles

11 years of experience
69 reviews
Charles
11 years of experience
Audi S5 V6-3.0L Turbo - Car Battery Replacement - Fort Lauderdale, Florida
Very good

Kenneth

20 years of experience
775 reviews
Kenneth
20 years of experience
Audi S5 V8-4.2L - Air Pump - Los Angeles, California
very professional and friendly

Omar

12 years of experience
287 reviews
Omar
12 years of experience
Audi S5 V6-3.0L Turbo - Oil Change - Fort Lauderdale, Florida
Great mechanic goes above and beyond

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Audi S5 V8-4.2L - Check Engine Light is on - Cypress, Texas
Stellar, as always.

Excellent Rating

(59)

Rating Summary
55
3
0
0
1
55
3
0
0
1
Number of Audi S5 services completed
649+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

P0404 OBD-II Trouble Code: Exhaust Gas Recirculation Circuit Range/Performance
P0404 code definition Exhaust Gas Recirculation Circuit Range/Performance What the P0404 code means P0404 is an OBD-II generic code that the engine...
P0605 OBD-II Trouble Code: Internal Control Module ROM Error
P0605 P0605 code definition Internal Control Module ROM Error (Module Identification Defined by SAE J1979) What the P0605 code means The Engine Control Module (ECM) is responsible for many major vehicle functions such as ignition timing, anti lock-braking, fuel injection,...
How to Buy a Personalized License Plate in Minnesota
If If you have been looking for a way to have a little more fun and personalization with your vehicle, a personalized license plate (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer) could be perfect for you. Personalized license plates offer you an opportunity to make your...

Radiator keeps blowing coolant back into holding tank

Hi, thanks for writing in. This is a sign that you may need to have the radiator system burped. This is a process that is used to relieve the air in the system which can cause the coolant to overflow...

Is it possible when you lose a key to 2002 Ford Expedition with the pats system, to replace the brain and get a another key cut so that you don't have to use a key with chip any longer.

03 Saturn VUE 3.0 V6 timing belt broke. Is it worth the time and money to replace and retime it only to find out I have bent valves?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com