Audi S5 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Audi S5 Car Battery Replacement is $353 with $258 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Audi S5V6-3.0L TurboService typeCar Battery ReplacementEstimate$630.79Shop/Dealer Price$784.74 - $1190.35
2010 Audi S5V6-3.0L TurboService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$764.79 - $1170.42
2011 Audi S5V6-3.0L TurboService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$764.78 - $1170.42
2015 Audi S5V6-3.0L TurboService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$764.73 - $1170.32
2014 Audi S5V6-3.0L TurboService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$764.82 - $1170.49
2010 Audi S5V8-4.2LService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$764.78 - $1170.42
2021 Audi S5V6-3.0L TurboService typeCar Battery ReplacementEstimate$624.99Shop/Dealer Price$766.12 - $1167.28
2020 Audi S5V6-3.0L TurboService typeCar Battery ReplacementEstimate$624.99Shop/Dealer Price$766.49 - $1167.94
Show example Audi S5 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Audi S5 Car Battery Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Tow Hook
Tow Tow hooks come in a very wide range of styles, types and sizes depending on the application. They’re used for vehicle recovery, and can be attached to anything from a chain to a tow strap to the receiver on...
P0391 OBD-II Trouble Code: Camshaft Position Sensor "B" Circuit Range/Performance (Bank 2)
P0391 code means indicates that the problem is on the side of the engine which does not contain cylinder #1 due to bad sensors, or connectors.
P0587 OBD-II Trouble Code: Cruise Control Vent Control Circuit Low
P0587 means an error with the cruise control vent control circuit, often caused by a defective vent control solenoid.

How do you check the MyKey® status on my car?

Your car has the ability to track a lot of information about the MyKeys® that are programmed to work with it. Here’s what you need to know about the various system status messages. MyKey® Miles: This tells you the total...

Car stalls, and then stops, after I restart it goes a bit and stops again. Speed is low

Hi and thanks for contacting YourMechanic. All three codes refer to the pressure control solenoid in the transmission. Check the fluid level (https://www.yourmechanic.com/services/transmission-fluid-service) and top it off if the fluid is low. Check the harness to the transmission for any...

Hi i have problems with my CHASSIS/VSA MODULATOR (NISSIN) FOR 2013 HONDA ACCORD SEDAN ex. I was wondering where I can find a video

The modulator should only be replaced if you have developed, or otherwise received, a conclusive diagnostic proving failure. For want of that you are likely wasting your time and money and also, as important, losing a valuable opportunity to understand...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com