Audi Q4 e-tron ABS Light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,467)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,467)

ABS Light is on Inspection Service

How much does a ABS Light is on Inspection cost?

On average, the cost for a Audi Q4 e-tron ABS Light is on Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Audi Q4 e-tronElectricService typeABS Light is on InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
Show example Audi Q4 e-tron ABS Light is on Inspection prices

How this system works:

When an issue arises with your anti-lock brake system (ABS), a corresponding light will illuminate on your dashboard. The light will display as the acronym “ABS.”

Your ABS exists to keep your car from skidding dangerously during braking. It is an automated safety system that recognizes when your wheels stop rotating (while your car is still in motion) and releases brake fluid pressure, allowing the wheels to continue to rotate. This stops your car from locking up and skidding uncontrollably, and returns the control of the vehicle to you.

Like most systems in your vehicle, your ABS can falter, and you’ll want to resolve the issue as soon as it does.

Common reasons for this to happen:

Faulty Wheel Speed Sensor

The ABS relies on information from the wheel speed sensors, which are placed inside the hub of each wheel and occasionally inside the transmission. These sensors determine the rate at which the wheels are moving, and relay that information to the ABS. When the ABS receives information that one or more of the vehicle’s wheels are moving slower than the others, the system releases brake fluid pressure, which then allows the wheels to resume movement. If the wheel speed sensor is defective, or if the wiring from the sensor to the ABS is damaged, then the ABS will not get the wheel speed information that it requires.

The wheel speed sensor is made up of two components: a metal ring with teeth attached to a drive axle or wheel bearing, and the sensor itself, which reads the teeth on the ring as the wheel rotates. As the wheel speed sensor is located very close to the braking system, the high heat generated by the brakes cause the wheel speed sensor to be more susceptible to damage. This in turn makes it one of the more common causes of the ABS light coming on.

Unresponsive Hydraulic Pump or Valve

When the wheel speed sensor alerts the ABS that the wheels are moving at different speeds, a hydraulic valve is responsible for releasing, or increasing, the brake fluid pressure to prevent the wheels from losing traction with the ground. Like all pumps and valves, those connected to the ABS are liable to become damaged and unresponsive. This may be due to internal wear typically from dirty brake fluid.

Faulty ABS Module

Corrosion on the ABS module can keep information from being relayed between the wheel speed sensor and the ABS. Corrosion is a relatively common issue, and one that can cause problems in the aforementioned wheel speed sensor wires. Even a small amount of corrosion can cause enough resistance on the wires to keep the system from working. In less common instances, the computer in the module can fail and need to be replaced.

Low Fluid Levels

The ABS relies on fluid to help regulate pressure. If the ABS fluid reservoir is low, or if there is too much air in the system, then the ABS will not be able to do its job.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the ABS issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will have a scan tool, which allows them to “talk” to the ABS module to find out what is causing the light to come on. The mechanic will check the ABS fuse, and then review the entire ABS system for problems.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,467)

Rating Summary
2,288
87
19
12
61
2,288
87
19
12
61

Nolan

30 years of experience
225 reviews
Nolan
30 years of experience
Audi A4 Quattro L4-2.0L Turbo - Starter - Tucson, Arizona
Nolan was very professional and on time! He did a great job!

Farnaz

20 years of experience
80 reviews
Farnaz
20 years of experience
Audi Allroad Quattro V8-4.2L - Brake System Flush - Irvine, California
Awesome

Jermaine

24 years of experience
270 reviews
Jermaine
24 years of experience
Audi A7 Quattro V6-3.0L Turbo - Brake Pads Replacement (Rear) - Chevy Chase, Maryland
Great work. Quick. Smart

Rusty

23 years of experience
528 reviews
Rusty
23 years of experience
Audi Q5 V6-3.2L - Battery will not hold a charge Inspection - Arlington, Texas
He was great very knowledgeable!

Excellent Rating

(2,467)

Rating Summary
2,288
87
19
12
61
2,288
87
19
12
61
Number of Audi services completed
27137+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in Illinois
In In order to drive a vehicle legally in the state of Illinois, you must carry several types of liability insurance. The minimum liability insurance required for vehicle owners in Illinois is as follows: $20,000 for Property Damage Liability, which...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Arizona
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Arizona through the Vehicle Emissions Inspection Program.
P0489 OBD-II Trouble Code: Exhaust Gas Recirculation “A” Control Circuit Low
P0489 means that the exhaust gas recirculation (EGR) “A” control circuit is reporting a low voltage flow due to faulty wiring or clogged EGR passages.

Car making ticking noise

Hello. Diagnosing a noise is a hands-on job and requires listening when the engine is running. Diagnosis may require a stethoscope to check around while the car is running or possibly removing the engine belt. You could have a noisy...

The car shutters, has difficulty accelerating

The flashing Check Engine Light indicates a fault that has the potential to damage the vehicle's catalytic converter (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-catalytic-converter). The car flashes the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) to let you know that the car should be checked as soon as...

Check Engine Light is on - code P0328

Hi there. A failure of the engine knock sensor is a somewhat risky issue with a turbocharged engine such as yours. Turbocharging increases cylinder pressure during operation and makes the engine more likely to experience "pre-detention" or knocking. The knock...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com