Audi A3 Quattro Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(33)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Audi A3 Quattro Power Steering Pressure Hose Replacement is $547 with $365 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Audi A3 QuattroL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$932.38Shop/Dealer Price$1123.29 - $1677.59
2012 Audi A3 QuattroL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$996.59Shop/Dealer Price$1202.46 - $1810.69
2018 Audi A3 QuattroL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$981.77Shop/Dealer Price$1182.18 - $1777.98
2013 Audi A3 QuattroL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$996.59Shop/Dealer Price$1202.51 - $1810.78
2006 Audi A3 QuattroV6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$1101.06Shop/Dealer Price$1305.79 - $1889.80
2010 Audi A3 QuattroL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$920.67Shop/Dealer Price$1107.93 - $1659.50
2009 Audi A3 QuattroV6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$955.07Shop/Dealer Price$1150.65 - $1727.81
2008 Audi A3 QuattroV6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$1101.06Shop/Dealer Price$1299.85 - $1879.42
Show example Audi A3 Quattro Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(33)

Rating Summary
33
0
0
0
0
33
0
0
0
0

Michael

7 years of experience
142 reviews
Michael
7 years of experience
Audi A3 Quattro L4-2.0L Turbo - Check Engine Light is on - Seattle, Washington
Very helpful, very knowledgeable, as well as very professional. Overall did a good job and fixed my mechanical problems.

Augie

32 years of experience
263 reviews
Augie
32 years of experience
Audi A3 Quattro L4-2.0L Turbo - Oil Change - Canyon Country, California
Professional, pleasant attitude, quick service.

Jared

17 years of experience
44 reviews
Jared
17 years of experience
Audi A3 Quattro V6-3.2L - Oil Change - Wilsonville, Oregon

Ben

30 years of experience
59 reviews
Ben
30 years of experience
Audi A3 Quattro L4-2.0L Turbo - Headlight Bulb Replacement (Driver Side Low Beam) - Acworth, Georgia
Great job by Ben. Informed me about an issue with my headlight I didn't know I had and fixed my bulb issue. Thanks Ben!

Excellent Rating

(33)

Rating Summary
33
0
0
0
0
33
0
0
0
0
Number of Audi A3 Quattro services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

P2213 OBD-II Trouble Code: NOx Sensor Circuit Bank 2
P2213 means there is an issue with the NOx Sensor Circuit Bank 2, most likely due to a faulty catalytic converter, or bad oxygen sensors.
How to Replace a Car Combination Valve
The combination valve balances your brake system. If broken, it should be replaced to ensure a safe driving experience.
Is it Safe to Drive With an EVAP Leak?
While it is safe to drive with an EVAP system leak, it causes excess car pollution. Fixing the problem is often as simple as tightening the gas cap.

Instruments, interior lights, radio, and power windows not working.

I would test all your fuses and make sure they are all good. There should be one for the instrument cluster and interior lights. Have a mechanic from YourMechanic do it if you are unsure how.

While driving my Jeep Commander randomly turns off. The most recent one it didn't want to turn on until several tries.

Hello. You would need to have the computer tested to see what codes are stored in the memory and then have them diagnosed. I suspect that it is the crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) that is the cause for the stalling, but...

My steering wheel vibrates an i have a lost of power? Seems like engine is shaking

Hey there, thank you for asking about your 2005 Cadillac SRX. This is a known issue with the Cadillac SRX and is related to the steering wheel sensor. This sensor monitors the direction the wheels are turning. When it senses...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com