Audi 80 Quattro Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(49)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(49)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Audi 80 Quattro Valve Cover Gasket Replacement is $171 with $28 for parts and $142 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Audi 80 QuattroL5-2.3LService typeValve Cover Gasket ReplacementEstimate$228.81Shop/Dealer Price$269.14 - $331.07
1992 Audi 80 QuattroL5-2.3LService typeValve Cover Gasket ReplacementEstimate$198.81Shop/Dealer Price$239.19 - $301.15
1988 Audi 80 QuattroL5-2.3LService typeValve Cover Gasket ReplacementEstimate$198.81Shop/Dealer Price$239.18 - $301.14
1989 Audi 80 QuattroL5-2.3LService typeValve Cover Gasket ReplacementEstimate$198.81Shop/Dealer Price$239.12 - $301.04
1990 Audi 80 QuattroL5-2.3LService typeValve Cover Gasket ReplacementEstimate$198.81Shop/Dealer Price$239.22 - $301.22
Show example Audi 80 Quattro Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(49)

Rating Summary
48
0
0
0
1
48
0
0
0
1

Theodore

16 years of experience
1587 reviews
Theodore
16 years of experience
Audi A8 Quattro V8-4.2L - Valve Cover Gasket - Seattle, Washington
Excellent

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Audi S4 V8-4.2L - Valve Cover Gasket - Anaheim, California
He was on time. Was willing to come and fix a part that broke on a couple days later. Would highly recommend.

Whitney

39 years of experience
783 reviews
Whitney
39 years of experience
Audi TT Quattro L4-1.8L Turbo - Valve Cover Gasket - Redwood City, California

David

36 years of experience
195 reviews
David
36 years of experience
Audi A6 Quattro V6-3.2L - Valve Cover Gasket - Santa Monica, California
David showed up on time and was friendly to show under the hood of my car. He pulled out the work that I don't need and recommended to replace spark plugs which he went and got immediately.

Excellent Rating

(49)

Rating Summary
48
0
0
0
1
48
0
0
0
1
Number of Audi Valve Cover Gasket Replacement services completed
539+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

The Guide to Legal Car Modifications in New Jersey
ARENA Creative / Shutterstock.com Those who live in New Jersey or are planning to move to the area need to know the regulations concerning vehicle modifications to ensure their cars or trucks that have been modified are...
Am I Equipped to Be a Mobile Technician?
Automotive technician jobs provide a rewarding career and becoming a mobile technician can improve your auto mechanic salary.
The Best Tool to Diagnose Sensor Failures
Mechanics may regularly run into sensor failures when performing a repair service. Automotive oscilloscopes help properly diagnose these issues.

Radiator fan not working.

The fan for a radiator supplies airflow while the car is sitting at a stop, generally when I see a car that is slowly overheating I check the fluid level to make sure it's full and that the water pump...

oder of schooling for automotive industry?

Hi there. I have taught automotive technology and I can tell you that you can work while training in most programs. You will find that body repair and automotive repair are two separate programs. The automotive repair program (https://www.yourmechanic.com/article/how-to-become-an-automotive-mechanic), for...

Timing chain gasket is bad. I check the engine oil and found chocolate foam. Is it possible the gasket can leak coolant in engine? Fresh rebuild.

Hi there. If you check the engine oil and see the oil look like a milk shake, then the engine oil is mixed with coolant or water. Also if you are finding gasket material in the engine oil, then a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com