logo

Audi 200 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(19)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Audi 200 Control Arm Assembly Replacement is $292 with $110 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Audi 200L5-2.2L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$485.86Shop/Dealer Price$558.65 - $755.76
1991 Audi 200L5-2.2L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$943.71Shop/Dealer Price$1129.70 - $1676.85
1990 Audi 200L5-2.2L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$954.23Shop/Dealer Price$1142.92 - $1698.01
1991 Audi 200L5-2.2L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$438.69Shop/Dealer Price$498.49 - $666.92
1990 Audi 200L5-2.2L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$748.07Shop/Dealer Price$889.08 - $1292.45
1990 Audi 200L5-2.2L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$943.71Shop/Dealer Price$1130.13 - $1677.61
1991 Audi 200L5-2.2L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$954.23Shop/Dealer Price$1142.95 - $1698.07
1990 Audi 200L5-2.2L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$769.03Shop/Dealer Price$911.41 - $1327.60
Show example Audi 200 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Audi Control Arm Assembly Replacement services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(19)
Rating Summary
19
0
0
0
0
19
0
0
0
0

Johnny

34 years of experience
392 reviews
Request Johnny
Johnny
34 years of experience
Request Johnny
by Deane
Audi 200 L5-2.2L Turbo - Car is not starting - Sacramento, California
Diagnosed problem quickly and professionally.

Martin

43 years of experience
90 reviews
Request Martin
Martin
43 years of experience
Request Martin
by Joel
Audi 200 L5-2.2L Turbo - Car is overheating - San Marcos, Texas
Thank you

Luis

5 years of experience
302 reviews
Request Luis
Luis
5 years of experience
Request Luis
by Terri
Audi Q5 V6-3.2L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Richmond, Virginia
Luis was so great, very knowledgeable and quick. Excellent customer service and I recommend him to anyone. He did great work on my Audi and even pointed out other things that may require future maintenance. Thanks Luis : )

Jimmi

28 years of experience
343 reviews
Request Jimmi
Jimmi
28 years of experience
Request Jimmi
by Jeffrey
Audi A7 Quattro V6-3.0L Turbo - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Winter Garden, Florida
Personable, professional, prompt and competent.

Excellent Rating

(19)
Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Audi Control Arm Assembly Replacement services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

B1914 OBD-II Trouble Code: Air Bag Crash Sensors 1 and 2 Circuit Short To Ground
B1914 means there is an issue with one or more of the sensors in the air bag system, likely due to a faulty sensor or defective wiring.
Read more
How to Figure Out the Full Cost of a Car Loan
Taking Taking out a car loan is one of the most common ways to finance purchasing a car. This is especially true if you are buying a new car, which usually costs too much to pay for in cash. Buyers...
Read more
P0667 OBD-II Trouble Code: PCM/ECM/TCM Internal Temperature Sensor Range or Performance
P0667 means there is a problem with a temperature reading within the engine or transmission. This could be due to overheating or faulty wiring.
Read more

Airbag warning light is on, are the airbags broken?

This concern could be related to a number of different areas of the Supplemental Restraint System (SRS). The weight sensor under the seat may not be reading a correct value. There could be an open or short somewhere in the...
Read more

Need to find out how to set timing on balance shaft assembly.

Rotate the crank until the number 1 cylinder is at top dead center. Make sure to replace the adjustment shims exactly as they came out, on the seat faces of the balance shaft assembly. Line up the marks on the...
Read more

The car starts to stall when I accelerate at high speed.

I would first check to see if the PCM has set any diagnostic trouble codes, including pending codes. Codes can be downloaded and evaluated by YourMechanic (http://www.yourmechanic.com) in the context of a Check Engine Light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection). The camshaft and...
Read more
  1. Home
  2. Estimates
  3. Audi
  4. 200
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE