Acura TSX Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Acura TSX Car Battery Replacement is $262 with $167 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Acura TSXV6-3.5LService typeCar Battery ReplacementEstimate$464.39Shop/Dealer Price$569.24 - $844.42
2006 Acura TSXL4-2.4LService typeCar Battery ReplacementEstimate$429.93Shop/Dealer Price$531.20 - $795.55
2012 Acura TSXL4-2.4LService typeCar Battery ReplacementEstimate$429.93Shop/Dealer Price$531.20 - $795.55
2009 Acura TSXL4-2.4LService typeCar Battery ReplacementEstimate$429.93Shop/Dealer Price$531.16 - $795.48
2007 Acura TSXL4-2.4LService typeCar Battery ReplacementEstimate$429.93Shop/Dealer Price$531.22 - $795.60
2013 Acura TSXV6-3.5LService typeCar Battery ReplacementEstimate$444.39Shop/Dealer Price$549.27 - $824.47
2014 Acura TSXL4-2.4LService typeCar Battery ReplacementEstimate$434.93Shop/Dealer Price$535.96 - $800.13
2004 Acura TSXL4-2.4LService typeCar Battery ReplacementEstimate$434.93Shop/Dealer Price$536.61 - $801.27
Show example Acura TSX Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0

Pardeep

16 years of experience
1060 reviews
Pardeep
16 years of experience
TSX 2012 - Battery - Fremont, CA
Pardeep was very helpful and knowledgeable.

Larry

15 years of experience
23 reviews
Larry
15 years of experience
TSX 2009 - Oil Pressure Sensor - Dublin, OH
Overall the experience was great. He got held up a few minutes at his previous appointment but let me know ahead of time so I wasn't left wondering. Still made it only a few minutes late. He did the work within the 1 and 1/2 hour estimated time and so far the work seems great.

Michael

14 years of experience
11 reviews
Michael
14 years of experience
TSX 2004 - Steering Rack/Gearbox - Albuquerque, NM
Michael is an EXPERT at what he does!! I am very pleased with his level of service. Thank you Michael!

William

14 years of experience
95 reviews
William
14 years of experience
TSX 2004 - Serpentine/Drive Belt - Denver, CO
William was early and very knowledgeable about the repair. Thank you for your quick service.

Excellent Rating

(19)

Rating Summary
19
0
0
0
0
19
0
0
0
0
Number of Acura TSX Car Battery Replacement services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Heater Blower Motor
If your car's heater doesn't work, only works on certain speeds, or only cold air comes out, you may need to replace the heater blower motor.
Symptoms of Bad or Failing Steering Rack Mounting Bushings
Common signs include clunking or clicking sounds, jerking movements in the steering wheel, and inconsistent steering.
How to Read a VIN (Vehicle Identification Number)
A car VIN (Vehicle Identification Number) contains unique information about where the car was made and can be found in your car or online.

Faulty speed sensor causing car to stall.

If you are referring to P0320 - Ignition/Distributor Engine Speed Input Circuit code, then the most common cause of the problem is the crankshaft position sensor. This sensor controls ignition timing of the engine and when it fails the computer...

Flat tire won't hold air

Radial tires usually will hold some kind of air as long as the object that caused the puncture is left in the tire. If removed then yes, the tire will most certainly go flat right away. Radial tires can usually...

Idle drops when pushing the clutch IN

You should first have the computer scanned for any codes that may contribute to the problem like the idle control valve or mass air flow sensor. Check all the intake hoses for any cracks between the therottle body and the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com