Acura TL Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(990)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(990)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Acura TL Intake Manifold Gaskets Replacement is $373 with $107 for parts and $266 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Acura TLV6-3.2LService typeIntake Manifold Gaskets ReplacementEstimate$760.16Shop/Dealer Price$846.36 - $1059.60
1996 Acura TLV6-3.2LService typeIntake Manifold Gaskets ReplacementEstimate$777.52Shop/Dealer Price$845.41 - $1021.62
2001 Acura TLV6-3.2LService typeIntake Manifold Gaskets ReplacementEstimate$688.13Shop/Dealer Price$770.41 - $997.47
1999 Acura TLV6-3.2LService typeIntake Manifold Gaskets ReplacementEstimate$665.39Shop/Dealer Price$741.98 - $951.97
1998 Acura TLL5-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$833.02Shop/Dealer Price$930.88 - $1177.21
2013 Acura TLV6-3.7LService typeIntake Manifold Gaskets ReplacementEstimate$522.66Shop/Dealer Price$590.63 - $779.57
1997 Acura TLV6-3.2LService typeIntake Manifold Gaskets ReplacementEstimate$777.52Shop/Dealer Price$845.67 - $1022.09
2010 Acura TLV6-3.7LService typeIntake Manifold Gaskets ReplacementEstimate$522.66Shop/Dealer Price$590.16 - $778.75
Show example Acura TL Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(990)

Rating Summary
922
35
6
7
20
922
35
6
7
20

Kwante

12 years of experience
11 reviews
Kwante
12 years of experience
TL 2012 - Serpentine/Drive Belt - Gwynn Oak, MD
Quick and got the job done right.

Kwante

12 years of experience
11 reviews
Kwante
12 years of experience
TL 2012 - Loud squealing or squeaking is coming from timing belt - Gwynn Oak, MD
On time and very knowledgeable

William

14 years of experience
95 reviews
William
14 years of experience
TL 2003 - Oxygen Sensor - Denver, CO
Extremely resourceful, always gave explanations for what he was doing. Recommended better parts than what I had. Saved me money in the long run. Extremely knowledgeable. I highly recommend.

Alexander

5 years of experience
126 reviews
Alexander
5 years of experience
TL 2004 - Starter - Commercial Point, OH
Alexander did an outstanding job replacing the starter on my 04 Acura.

Excellent Rating

(990)

Rating Summary
922
35
6
7
20
922
35
6
7
20
Number of Acura TL services completed
10890+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Be a Good Defensive Driver
It It goes without saying that getting into an accident (https://www.yourmechanic.com/article/how-to-survive-a-car-collision-by-joyce-morse) is unfortunate for numerous reasons. The biggest downside of an accident is obviously the injury and trauma that it can cause to you and your passengers, but there are...
How to Replace an Exhaust Gas Recirculation (EGR) Pressure Feedback Sensor
Exhaust gas recirculation (EGR) systems use a pressure feedback sensor to tell the powertrain control module (PCM) how much exhaust gas is flowing.
A Buyer’s Guide to the 2012 Chevrolet Colorado
The The 2012 Chevrolet Colorado is the perfect size pickup for running errands on the weekend and doing light duty chores around the yard. For those who don’t need a full size pickup, the Colorado offers almost everything a full...

I think someone is messing with car without keys, steer wheel moves clockwise while I'm driving, something burns my eyes.

Hello there. To be honest, I wouldn't begin to assume what's causing the smell in your vehicle that is causing medical side effects; as that would simply be irresponsible without being a medical expert. I can say that it is...

Security light on car wont start

Try another key if you have one. If the vehicle starts, then the first key is bad. The keys have a transponder in it that the ignition switch reads and allows the car to start. If you do have a...

My car won’t shift to the park gear. All other gears work

There are a number of different things that may cause the vehicle to not go into park such as a broken or damaged shift cable or mechanism, a faulty key tumbler in some cases, or a faulty transmission solenoid. I...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com