Acura RLX Headlight Dimmer Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Headlight Dimmer Switch Replacement Service

How much does a Headlight Dimmer Switch Replacement cost?

On average, the cost for a Acura RLX Headlight Dimmer Switch Replacement is $240 with $145 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Acura RLXV6-3.5LService typeHeadlight Dimmer Switch ReplacementEstimate$475.77Shop/Dealer Price$583.47 - $867.18
2014 Acura RLXV6-3.5L HybridService typeHeadlight Dimmer Switch ReplacementEstimate$384.65Shop/Dealer Price$474.60 - $704.99
2015 Acura RLXV6-3.5LService typeHeadlight Dimmer Switch ReplacementEstimate$455.77Shop/Dealer Price$563.50 - $847.23
2015 Acura RLXV6-3.5L HybridService typeHeadlight Dimmer Switch ReplacementEstimate$384.65Shop/Dealer Price$474.56 - $704.92
2017 Acura RLXV6-3.5LService typeHeadlight Dimmer Switch ReplacementEstimate$455.77Shop/Dealer Price$556.00 - $834.11
2014 Acura RLXV6-3.5LService typeHeadlight Dimmer Switch ReplacementEstimate$455.77Shop/Dealer Price$563.50 - $847.23
2016 Acura RLXV6-3.5L HybridService typeHeadlight Dimmer Switch ReplacementEstimate$389.65Shop/Dealer Price$479.36 - $709.57
2017 Acura RLXV6-3.5L HybridService typeHeadlight Dimmer Switch ReplacementEstimate$389.65Shop/Dealer Price$472.32 - $697.26
Show example Acura RLX Headlight Dimmer Switch Replacement prices

What is the Headlamp Dimmer Switch all about?

The headlamp dimmer switch may be part of the turn signal switch or it can be mounted on the floor. This switch enables you to dim the headlamp beam from low to high or vice versa. A bad switch will not change the headlamp beam. Your headlamps being stuck on high beams can create a dangerous situation for oncoming drivers.

Keep in mind:

  • In many vehicles, the dimmer switch is part of a multi-switch that also controls the windshield wipers, turn signals, and cruise control. *Replacing this multi-switch means all of those components will need to be re-wired.

How it's done:

  • Inspect the switch.
  • Remove and replace the faulty switch.
  • Check operation of the headlamps and verify the high/low beam switching.

Our recommendation:

It should be noticeable when your headlamp dimmer switch stops working. If you find that your vehicle is unable to alternate between high and low beams, then you should schedule a service.

What common symptoms indicate you may need to replace the Headlamp Dimmer Switch?

  • Lights will not change between high and low beams. They will be stuck on one or the other.
  • Headlamps will not stay on high-beam setting.

How important is this service?

The headlamp dimmer switch allows you to select between your headlamp's high and low beams. When you pull the lever on your steering wheel column, the dimmer switch triggers the high beams, and either turns them on or turns them off. When the headlamp dimmer switch malfunctions, your headlights won’t be able to switch between high and low. You’ll either be stuck with only low beams, which can mean poor visibility, or you’ll be stuck with only high beams, which is hazardous to the drivers around you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(10)

Rating Summary
9
0
1
0
0
9
0
1
0
0

MICHAEL

33 years of experience
184 reviews
MICHAEL
33 years of experience
Acura RLX V6-3.5L - Brake Pads Replacement (Rear) - Lafayette Hill, Pennsylvania
Great mechanic, highly reccomend.

Michael

27 years of experience
516 reviews
Michael
27 years of experience
Acura RLX V6-3.5L - Car is not starting Inspection - Chandler, Arizona
Fast, fair, and easy.

Derrick

20 years of experience
19 reviews
Derrick
20 years of experience
Acura RLX V6-3.5L - Pre-purchase Car Inspection - Norfolk, Virginia
overall wasn't that bad , i mean just walk around and open the hook up check the fluid and test drive the.car , it tooks 40 mins to complete the job really not worth $96 . my car is cpo so i knew is not bad but not running the computer test no check the tire pressure for me is more like state car inspection plus the 4 more fluid check , charge for $96 is over charge and can't count on them to buy the used car at all.

Jeremy

20 years of experience
642 reviews
Jeremy
20 years of experience
Acura RLX V6-3.5L - Car is hard to start - West Palm Beach, Florida
Great. Jeremy was on time, Knowledgeable, courteous, and patient with all the questions we had about our particular problems !

Excellent Rating

(10)

Rating Summary
9
0
1
0
0
9
0
1
0
0
Number of Acura RLX services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

What Is the Difference Between a Universal Hose and a Molded Hose?
Your Your radiator cools your engine – coolant is pumped through the engine, where it absorbs heat, and then back into the radiator. In the radiator, the coolant dissipates the heat into the environment, and is then pumped back into...
P2033 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
P2033 trouble code definition Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2 What the P2033 code means P2033 is an...
Industry News for Automotive Techs: August 3-9
VW is caught cheating even more on emissions tests, PTEN names top 2016 automotive innovations, aluminum goes mainstream on the new F-150, and more.

I was only able to find acrylic lacquer thinner, could I use if to clear my clogged catalytic convert?

I am not sure who would have told you to clean or unclog the converter out with lacquer thinner, but that is not a very good idea, and you shouldn't do it. The thinner may damage the converter internal material,...

Car won't start and is also leaking oil.

Your battery needs replaced in the car. This is why nothing will work as the key is turned to the 'ON' position. Then, if your engine does not have a valve cover gasket, be sure to install one to prevent...

What is minimum thickness for rear brake discs on 2004 Cadillac SRX?

Hello, thank you for writing in. The minimum thickness for the brake rotor should be listed on the rotor itself towards the center beyond the braking surface. It will vary depending on what rotors have been installed on the vehicle....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com