Acura RLX Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(10)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(10)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a Acura RLX Clunking or knocking noise from wheels Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Acura RLXV6-3.5L HybridService typeClunking or knocking noise from wheels InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Acura RLXV6-3.5L HybridService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Acura RLXV6-3.5LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Acura RLXV6-3.5L HybridService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2015 Acura RLXV6-3.5L HybridService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2014 Acura RLXV6-3.5L HybridService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2018 Acura RLXV6-3.5L HybridService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2019 Acura RLXV6-3.5LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Acura RLX Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(10)

Rating Summary
9
0
1
0
0
9
0
1
0
0

MICHAEL

33 years of experience
184 reviews
MICHAEL
33 years of experience
Acura RLX V6-3.5L - Brake Pads Replacement (Rear) - Lafayette Hill, Pennsylvania
Great mechanic, highly reccomend.

David

10 years of experience
193 reviews
David
10 years of experience
Acura RLX V6-3.5L - Brake Pads Replacement (Front) - Lafayette Hill, Pennsylvania
David is a wonderful professional. He got to work, changed brakes, cleaned up after himself. David was done fairly quickly. Performed 50 point check then departed. Great professional.

Jeremy

20 years of experience
603 reviews
Jeremy
20 years of experience
Acura RLX V6-3.5L - Car is hard to start - West Palm Beach, Florida
Great. Jeremy was on time, Knowledgeable, courteous, and patient with all the questions we had about our particular problems !

Richard

1 years of experience
29 reviews
Richard
1 years of experience
Acura RLX V6-3.5L - Oil Change - Dolton, Illinois
Richard was nice and professional. Job was done as prescribed. Will definitely use again.

Excellent Rating

(10)

Rating Summary
9
0
1
0
0
9
0
1
0
0
Number of Acura RLX services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

Off-Road Driving Techniques for Beginners
When When you bought that Jeep or Land Cruiser you had two thoughts in mind. First, it would get you around town. Second, it could be your moveable man cave. You had every intention of being one of the 44...
P0760 OBD-II Trouble Code: Shift Solenoid C Malfunction
P0670 code means there has been an irregularity detected within shift solenoid C often due too hydraulic blockages or low transmission fluid.
B1873 OBD-II Trouble Code: Turn Signal / Hazard Power Feed Circuit Short to Ground
B1873 means there is an issue with the circuit involving the turn signal and hazard light power feed, likely due to a damaged electrical component.

Power steering leak.

It is highly likely that your power steering hoses are leaking which has caused a low fluid condition. Low fluid in the power steering system will cause loss of power steering. It can also damage the power steering pump. I...

Idle air control stuck closed and the car won't hold at idle

Generally, a little air will pass through. But the thing is, the idle air control valve controls your idle speed. If that is shut, you are not going to get enough air bypass and the car will idle low enough...

My dashboard and running lights are not working.

There is a 10 amp fuse in the engine compartment fuse box #7 that sends power to the head light switch and powers the dash and running lights. Check to see if this fuse is good and has power to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com