Acura ILX Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(42)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(42)

Wheel Bearings Replacement Estimate for Acura ILX

Acura ILX Wheel Bearings Replacement costs $331 on average.

CarServiceEstimateShop/Dealer Price
2018 Acura ILXL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$241.03Shop/Dealer Price$292.79 - $416.57
2014 Acura ILXL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$674.29Shop/Dealer Price$844.60 - $1306.62
2015 Acura ILXL4-1.5L HybridService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$674.29Shop/Dealer Price$844.60 - $1306.62
2014 Acura ILXL4-2.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$674.29Shop/Dealer Price$844.56 - $1306.55
2015 Acura ILXL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$674.29Shop/Dealer Price$844.62 - $1306.67
2017 Acura ILXL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$405.61Shop/Dealer Price$499.43 - $752.96
2013 Acura ILXL4-1.5L HybridService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$679.29Shop/Dealer Price$849.36 - $1311.20
2016 Acura ILXL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$410.61Shop/Dealer Price$514.16 - $774.98
Show example Acura ILX Wheel Bearings Replacement prices

Wheel Bearings Replacement Service

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(42)

Rating Summary
42
0
0
0
0
42
0
0
0
0

Edgar

14 years of experience
38 reviews
Edgar
14 years of experience
Acura ILX L4-2.0L - Check Engine Light is on - Jersey City, New Jersey
Very professional.

Scott

36 years of experience
854 reviews
Scott
36 years of experience
Acura ILX L4-2.0L - Oil Change - Scottsdale, Arizona
Great!

Howard

30 years of experience
92 reviews
Howard
30 years of experience
Acura ILX L4-2.0L - Pre-purchase Car Inspection - Roswell, Georgia
Howard was great to work with. Very thorough.

Tabitha

17 years of experience
297 reviews
Tabitha
17 years of experience
Acura ILX L4-2.0L - Oil Change - San Diego, California
Great service

Excellent Rating

(42)

Rating Summary
42
0
0
0
0
42
0
0
0
0
Number of Acura ILX services completed
462+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
900+
experts on our platform

Recent articles & questions

What is a Compression Test?
A compression test will reveal the state of your engine’s parts, and can potentially save you money on buying a replacement engine.
B1898 OBD-II Trouble Code: Chime Input #2 Circuit Short to Ground
B1898 means there is a circuit issue with chime input 2, most likely due to a damaged electrical component.
How to Maintain Automotive Hand Tools
Automotive technicians take good care of automotive hand tools to stay safe and save money. Keep parts clean and in working order to maintain tools.

When i take my foot of the accelerator my car immediately slows down alot with out me pressing the brakes The higher the gear i go into the smoother it seems thi Tho

How much would an estimate be on fixing both inner and outer tie rod ends?

If you have already obtained a conclusive diagnostic and, on the basis of that, want to replace only the tie rod ends, you can obtain the written quote that you have requested, and schedule the repair to suit your needs,...

What could this be

Hi there. The squeaking sound you are hearing is most likely caused by the serpentine belt or the pulley's that drive the belt. In regards to routine maintenance on your Honda Civic, we have a great online tool that allows...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com