Anti-Lock Switch Replacement at your home or office.

Our certified mechanics come to you · Backed by our 12-month, 12,000-mile warranty · Get a fair and transparent estimate upfront


Anti-Lock Switch Replacement Service

What is the Anti-Lock Switch all about?

Anti-lock brakes offer significant improvements over older brake systems. They provide greater safety, particularly in difficult driving conditions. While there are numerous systems on the market, the type used on your car will vary depending on the make and model. Essentially, a braking computer (called the anti-lock brake control module) monitors driving conditions. When you press the brake pedal, it activates the anti-lock brake switch (also called the brake light switch). It is also responsible for allowing the car to shift out of park. This takes the system out of standby mode and puts it into active mode. It will now monitor the speed of each wheel and if one wheel is noticeably faster than the others, the system will automatically pulse the brakes on that wheel only to bring its speed back in line with the others.

The anti-lock brake switch is located behind the brake pedal, generally close to the top of the mounting arm. When you press the pedal, the switch activates. When you take your foot off the pedal, it deactivates. Not only does it tell the car’s brake system controller that the brakes are being operated, but it controls the signal to the brake lights. If the switch fails and the brake lights do not turn on, the transmission will not shift out of park.

Keep in mind:

  • Anti-lock switch failure is common, particularly in higher mileage vehicles.
  • The switch is not inspected during normal maintenance.
  • If the switch fails, the car will not shift out of park, meaning you’ll need to have it towed to a repair shop.

Our recommendation:

Without an operational anti-lock switch, not only will your car not come out of park (without the bypass being used), but the anti-lock brake system will not engage. While your brakes will operate normally, this isn’t a safe driving condition. Have any brake problems immediately addressed by one of our expert mechanics.

What common symptoms indicate you may need to replace the Anti-Lock Switch?

  • Car won’t shift out of park
  • ABS doesn’t engage even during specified conditions that should activate the system
  • ABS light on in the dash

How important is this service?

The anti-lock switch is important for proper braking operation in all road conditions. If it doesn’t function properly, you may not be able to stop in time to avoid an accident. Having a functional anti-lock switch/brake light switch is essential, not only because it controls the ABS system, but because it controls your brake lights. We recommend immediate diagnosis and repair by one of our expert mechanics if you’ve noticed any unusual operation with your brake system.

Fast and easy Anti-Lock Switch Replacement service at your home or office.


Recent articles & questions

P0528 OBD-II Trouble Code: Fan Speed Sensor Circuit Malfunction
P0528 P0528 code definition The P0528 code is the universal fault for fan speed sensor circuit no signal. This fault may be accompanied by other cooling system codes, such as P0480, or P0483. What the P0528 code means P0528 is...
P0309 OBD-II Trouble Code: Cylinder 9 Misfire Detected
P0309 means one of the engine cylinders is not firing properly due to a faulty coil, or sensor, spark plug, wiring, fuel injector or low fuel level.
P0419 OBD-II Trouble Code: Secondary Air Injection System Relay B Circuit Malfunction
Trouble code P0419 means the secondary air injection system relay B circuit is malfunctioning, often when the weather is too cold.

How do I turn off the Air Bag Light on the dash?

If the Air Bag Light on the dash of your car is on, it means that something’s causing the passenger sensing system to turn off the front air bag and possibly the side air bag. Here’s what you should do...

Truck is bouncing

Sounds like you might need to replace your shocks. Shock absorbers do exactly that, they absorb the shock of the road as you drive. They keep the vehicle from bouncing all over the road. When the shock absorbers go bad,...

Is bank2 sensor 1 upstream or downstream?

Hi there. When an oxygen sensor is referred to as upstream, it means it's located prior to the catalytic converter. On a 2006 Honda Accord V6, the Bank 2 Sensor 1 o2 sensor is located on the exhaust manifold; making...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com