Volvo 940 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volvo 940 Power Steering Pressure Hose Replacement is $278 with $138 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Volvo 940L4-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$706.58Shop/Dealer Price$848.08 - $1264.46
1991 Volvo 940L4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$421.83Shop/Dealer Price$492.62 - $700.88
1992 Volvo 940L4-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$421.83Shop/Dealer Price$492.65 - $700.92
1995 Volvo 940L4-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.32 - $1252.40
1995 Volvo 940L4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$501.65Shop/Dealer Price$593.90 - $863.14
1994 Volvo 940L4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$421.83Shop/Dealer Price$492.79 - $701.17
1992 Volvo 940L4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.34 - $1252.43
1993 Volvo 940L4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$501.65Shop/Dealer Price$592.42 - $860.56
Show example Volvo 940 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(34)

Rating Summary
31
3
0
0
0
31
3
0
0
0

Richard

22 years of experience
461 reviews
Richard
22 years of experience
Volvo 940 L4-2.3L - Brake Pads Replacement (Front, Rear) - Marietta, Georgia
Richard did a great job. The brakes work great, he was pleasant and very knowledgeable. Great experience..

Michael

22 years of experience
391 reviews
Michael
22 years of experience
Volvo 940 L4-2.3L - Car is not starting - Ontario, California
He arrived early, worked fast and resolve the no start issue on the spot. Very happy....

Steve

16 years of experience
187 reviews
Steve
16 years of experience
Volvo 940 L4-2.3L - Battery - Leonia, New Jersey
Very knowledgeable and totally professional. His experience with Volvos is very reassuring, and I plan to use him for any future problems.

Jamahl

21 years of experience
830 reviews
Jamahl
21 years of experience
Volvo 940 L4-2.3L - Car is not starting - Montverde, Florida
Arrived on time and found the starting problem in good time

Excellent Rating

(34)

Rating Summary
31
3
0
0
0
31
3
0
0
0
Number of Volvo 940 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How A Vehicle’s Headlights Work
The The History of Headlights When cars were first being produced, the headlight was more of a lamp, with an enclosed acetylene flame which had to be manually lit by the driver. Those early headlights were introduced in the 1880s,...
Understanding Hyundai Service Required Lights
Car symbols, or dashboard lights, are a car service reminder. The Hyundai Service Required light indicates when your car needs service.
Symptoms of a Bad or Failing Battery
Common signs include a rotten egg smell, slow cranking when starting, the Battery Light turning on, and vehicle electronics not powering on.

Sevear steering wheel vibration when brakes are applied.

The rotor may have gotten grease on it which will cause the brake vibration. Have the rotors cleaned and resurfaced or replaced after the axle is replaced. The grease on the new rotors would cause them to warp. A qualified...

Skoda/VW Intermittent power loss and RPM shooting high - Just after Car Servicing

Sound like your clutch has gone from being weak to being bad. (https://www.yourmechanic.com/article/how-can-i-tell-if-my-clutch-is-slipping) It doesn't take much to finish a clutch off once it starts slipping. When a clutch slips, it makes heat, which further deteriorates the lining. A skillful...

Hello Actually I've smart 453 brabus cabrio 2017 Battery dead I changed it and all went good After 2 days gear doesn't move more than n and d I searched and found the gear unlock switch and I unlocked it and now the car runs and all gear is working good but all warning lights are on and the steering wheel is stiff and the roof doesn't slide Any advices please

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com