Volvo 780 Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Volvo 780 Intake Manifold Gaskets Replacement is $230 with $76 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Volvo 780V6-2.8LService typeIntake Manifold Gaskets ReplacementEstimate$341.04Shop/Dealer Price$387.64 - $518.51
1991 Volvo 780L4-2.3L TurboService typeIntake Manifold Gaskets ReplacementEstimate$367.25Shop/Dealer Price$417.46 - $563.16
1990 Volvo 780L4-2.3L TurboService typeIntake Manifold Gaskets ReplacementEstimate$367.25Shop/Dealer Price$417.49 - $563.21
Show example Volvo 780 Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0

Joshua

9 years of experience
59 reviews
Joshua
9 years of experience
Volvo S80 L6-3.2L - Intake Manifold Gaskets - Aubrey, Texas
Very prompt and explained every thi ng I'll use this service again for sure

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Volvo 850 L5-2.3L Turbo - Intake Manifold Gaskets - Vallejo, California
Joshua, Was prompt,friendly and knowledgeable .I would recommend to anyone that's looking for mechanic. The cost of repair is way below of repair book quotes. Thank you, Gregorio

Shaun

17 years of experience
238 reviews
Shaun
17 years of experience
Volvo 940 L4-2.3L - Intake Manifold Gaskets - Mountain View, California
Shaun did a great job on my car. Prompt and courteous. Couldn't be happier.

Dave

24 years of experience
303 reviews
Dave
24 years of experience
Volvo V40 L4-1.9L Turbo - Intake Manifold Gaskets - Felton, California
It was a good experience having Dave arriving on time and was eager to work on the car. He listens to my descriptions of my problem with my car and steps I had taken to pinpoint to the repairs that I needed. He was done replacing the intake manifold gasket and within the time scheduled. I find Dave easy to communicate with. I would call him again if required and would recommend him to my friends and families.......thanks Dave

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0
Number of Volvo Intake Manifold Gaskets Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Hangover?
Being Being hungover is never fun. So many of us have experienced the headache, nausea, and the general feeling of regretting the prior night. You, in your drunken state, made a good choice not to drive last night, but now...
Why Are My Tires Wearing Out Faster Than Normal?
If If you noticed that one or more of your tires are exhibiting signs of abnormal wear or is wearing out at a suspiciously fast rate, it may be a sign that there are other problems with your vehicle. Your...
10 Best Stores to Buy Auto Parts in Albuquerque, New Mexico
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Abuquerque is AutoZone.

Fluid leak from power steering reservoir

Hello! The most common leak on a Nissan, especially the 3.5, is the power steering hose between the pump and the power steering rack. In order to access this hose, the panels below the cowl and wiper must be removed....

I have a new thermostat, how much should it cost to change it out?

Billing question sent to CS for the cost to replace the thermostat on a 2010 Jeep Liberty V6- 3.7L.

Car over heating

Hello there. Every car has a system that circulates coolant, a mixture of anti­-freeze and water, through the engine to absorb heat created by the combustion process and the friction created by moving parts within the engine. The hot liquid...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com