Volvo 240 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Volvo 240 Front Crankshaft Seal Replacement is $710 with $374 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Volvo 240L4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$1119.66Shop/Dealer Price$1315.22 - $1882.44
1990 Volvo 240L4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$1127.23Shop/Dealer Price$1318.92 - $1883.24
1993 Volvo 240L4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$1253.51Shop/Dealer Price$1462.97 - $2078.81
1991 Volvo 240L4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$1381.54Shop/Dealer Price$1643.78 - $2420.50
Show example Volvo 240 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(19)

Rating Summary
18
0
0
0
1
18
0
0
0
1

Nicholas

22 years of experience
354 reviews
Nicholas
22 years of experience
Volvo 240 L4-2.3L - Brake Pads Replacement (Front) - Denver, Colorado
Arrived on time. Work was preformed efficiently and professionally..

Nezar

27 years of experience
102 reviews
Nezar
27 years of experience
Volvo 240 L4-2.3L - Alternator Repair - Boca Raton, Florida
It was awesome. He showed up early was friendly and knowledgeable. He finished the job in a reasonable amount of time and showed me that the work had been completed.

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Volvo 240 L4-2.3L - Car is not starting - Alpharetta, Georgia
Very professional and working with me to correct issue. Booked for wrong problem. He found real problem immediately and booked new appointment today.

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Volvo 240 L4-2.3L - Alternator - Alpharetta, Georgia
Professional, hardworking and friendly.

Excellent Rating

(19)

Rating Summary
18
0
0
0
1
18
0
0
0
1
Number of Volvo 240 services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

P0394 OBD-II Trouble Code: Camshaft Position Sensor "B" Circuit Intermittent (Bank 2)
P0394 means the camshaft sensor circuit B that is in engine bank 2 produced an intermittent and incorrect voltage reading
How to Keep Your Car Safe When It’s Parked
It’s It’s reasonable to worry about your car when you park it in a foreign place, especially if that place doesn’t seem particularly friendly. Sometimes the thought of leaving a car in a vulnerable situation hinders us completely. But learning...
How to Replace a Lost or Stolen Car Title in Kentucky
It’s It’s an exciting day when you finally pay off the loan for your vehicle, or maybe you’re lucky enough to have saved enough money up front that you can pay for it in full. Whatever the route you have...

Idle rough when engine warm.

There are a few possible problems that could cause these symptoms. It could have a failed coolant temperature sensor, which reports the temperature of the engine to the engine control module. The engine control module uses this info to determine...

Hello,my name is Sandra, I have a'05 Pontiac G6,it has a sunroof and water is leaking on the floorboards on both sides,of back. I'

Water is like electricity. It follows the path of least resistance. Manufacturers have learned to make water flow over or through the car easily to keep it from getting to the interior. Hearing water sloshing inside any of the doors...

Wire for Check Engine Light was cut

The check engine light bulb should have one 12 volt hot wire that is run in parallel to other bulb lights. You can check for battery voltage between that wire (if you believe you have identified it) and ground. The...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com